Milwaukee
Milwaukee Tool SHOCKWAVE 3" MA
- SKU:
- MLW48-32-4508
- Availability:
- Usually Ships Same Day
- Weight:
- 0.10 LBS
Description
DUTY®
3" Magnetic
Drive Guide
A 3-inch sliding guide for supporting a screw during positioning and driving.
Product Overview
Use the 3-inch format when a compact insert tip needs a holder between the tool and the screw.
Check clearance for the sleeve to travel as the screw advances into the workpiece.
- Insert-bit retentionC-ring helps retain the bit.
- Magnetic positioningMagnet helps hold the fastener.
- ShockzoneHelps absorb peak torque.
- Sliding sleeveSupports initial screw driving.
Technical Specifications
- Overall length
- 3 in
- Bit format
- Insert driver bits
- Bit retention
- C-ring
- Magnetic hold
- Bit / fastener
- Torque relief
- Shockzone
- Sleeve
- Sliding stainless
Choose the Correct Fit
Fit a compatible insert bit and check the C-ring retains it securely. Seat the shank fully in the tool.
Choose a bit that exactly matches the screw recess. Clean the tip and magnetic area before positioning the fastener.
Installation & Care
Keep the tool straight with the screw. Allow the sleeve to retract freely as driving progresses.
Stop the tool before changing the bit or clearing metal chips. Inspect the holder for looseness, cracks or damaged retention.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help checking the fit? Tell Willy your tool, accessory and working dimensions so the GetPipe team can help.
Important Product Questions
Does a holder make every bit impact-rated?
No. Use an insert bit rated for the tool’s operating mode. The holder and bit each need to be suitable for the task.
Is magnetic hold enough to secure the insert bit?
Check the mechanical C-ring retention as well. Do not operate with a bit that can pull free unexpectedly.
Can this set the final tightening torque?
No. The depth markings help fastener control but do not measure torque. Follow the fastener or assembly requirement.
