Milwaukee
Milwaukee Tool 7PC SHOCKWAVE Impact Duty Carbide Hammer Drill Bit Concrete Screw Install Set
- SKU:
- MLW48-20-9097
- Availability:
- Usually Ships Same Day
- Weight:
- 0.90 LBS
Description
DUTY®
Concrete Screw
Installation Kit
Drill pilot holes and drive concrete screws with one matched SHOCKWAVE system, reducing accessory changes between steps.
Product Overview
Use the 5/32- or 3/16-inch pilot bit for the matching concrete screw, with 4 inches of usable length.
The PACKOUT-compatible case keeps the matched drilling and driving accessories organized.
- Accurate startsGround tip limits walking.
- Magnetic driversHelp hold concrete screws.
- Depth shoulderRecessed shoulder guides fit.
- Dust clearanceWide flutes remove debris.
Technical Specifications
- Bit diameters
- 5/32, 3/16 in
- Usable length
- 4 in
- Overall length
- 6 in
- Nut drivers
- 1/4, 5/16 in
- TORX sizes
- T25, T30
- Bit shoulder
- 1/4 in hex
Choose the Correct Fit
Match the bit to the concrete-screw instructions: the set pairs 5/32-inch holes with 3/16-inch screws and 3/16-inch holes with quarter-inch screws.
Confirm the required embedment, hole depth and head style before selecting the drill bit and driver for the fastener.
Installation & Care
Disconnect power before changing accessories. Assemble the drive sleeve securely and follow the screw maker’s installation procedure.
Clear masonry dust as directed and inspect carbide, sleeve and drivers for damage. Stop rather than force a bit or driver that does not seat correctly.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help matching a masonry bit? Tell Willy your fastener, required hole depth and the tool you plan to use.
Important Product Questions
Which accessories are supplied in the kit?
It contains 5/32- and 3/16-inch carbide bits, 1/4- and 5/16-inch concrete-screw nut drivers, 2-inch T25 and T30 TORX bits, and a drive sleeve.
Does the shoulder replace the screw installation instructions?
No. Confirm the required hole depth, cleaning procedure and embedment for the screw. The shoulder aids the matched system; it does not establish the requirements for every concrete fastener.
Can I use this system in an SDS holder directly?
The bits use a hex connection for compatible impacts and hammer drills. An SDS holder has a different interface; confirm the tool connection instead of forcing an incompatible shank.
