Milwaukee
Milwaukee Tool 3PC. SHOCKWAVE Impact Duty Carbide Hammer Drill Bit Set
- SKU:
- MLW48-20-9050
- Availability:
- Usually Ships Same Day
- Weight:
- 0.15 LBS
Description
DUTY®
3-Piece Carbide
Hammer Drill Set
Choose this 3-piece SHOCKWAVE selection for different concrete, brick and block hole sizes on one job.
Product Overview
The masonry set covers selected 5/32–1/4 in holes; choose the bit for the fastener specification.
Compatible hex holders and drill chucks let the bits serve different tool setups.
- Accurate startsGround tip limits walking.
- Sharpened edgesCarbide helps start the hole.
- Wide flutesCarry drilling dust out.
- Impact / hammer drillCheck tool compatibility.
Technical Specifications
- Size range
- 5/32–1/4 in
- Shank
- 1/4 in hex
- Tip material
- Carbide
- Tip grind
- Precision ground
- Flute design
- Wide
- Work materials
- Concrete, brick, block
Choose the Correct Fit
Match the hole size to the concrete fastener instructions. Check for concealed services before drilling.
Confirm the tool accepts the shank and select its approved drilling setting for the masonry.
Installation & Care
Disconnect power before changing bits. Keep the shank clean and check that the chuck retains it.
Let the bit cool before handling it. Inspect the carbide for chips and use the required dust controls.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help matching a masonry bit? Tell Willy your fastener, required hole depth and the tool you plan to use.
Important Product Questions
Which exact drill sizes and lengths are included?
The included diameters are 5/32, 3/16 and 1/4 inches. Each bit has a 4-inch usable section and 6-inch overall length.
Will this bit fit an SDS rotary hammer directly?
Check the tool connection. A quarter-inch hex shank is different from an SDS-Plus or SDS-Max shank; do not force it into an incompatible holder.
Does bit diameter alone establish the right anchor hole?
No. Follow the fastener maker’s required diameter, depth and hole-cleaning procedure. A matching diameter does not replace those installation requirements.
