Milwaukee
Milwaukee Tool SHOCKWAVE Impact Duty Magnetic Attachment and PH2 Bit Set - 3PC
- SKU:
- MLW48-32-4550
- Availability:
- Usually Ships Same Day
- Weight:
- 0.06 LBS
Description
DUTY®
Magnetic Attachment
With PH2 Driver Bits
Add magnetic screw retention to the included 2-inch Phillips #2 bits for easier positioning.
Product Overview
The PH2 selection suits matching Phillips #2 screws when holding the screw at the tip helps setup.
Check the shank area around the magnetizer when working near a recess or other close obstruction.
- Fastener positioningMagnetizes the working tip.
- Compact accessCompact bit-shank attachment.
- Removable sleeveFlexible removable sleeve.
- Wear Guard tipHelps preserve bit fit.
Technical Specifications
- Included tip
- Phillips #2
- Bit length
- 2 in
- Magnetizer fit
- Bits 2 in +
- Retention
- Magnetized bit tip
- Sleeve
- Flexible / removable
- Tip protection
- Wear Guard
Choose the Correct Fit
Match the PH2 tip to a Phillips #2 screw. Confirm full seating before applying driving force.
Fit the magnetizer to a compatible impact bit at least 2 inches long. Check that it is secure and clear of the tool holder.
Installation & Care
Test magnetic hold with your screw before moving it into position. Clear metal chips that prevent clean contact.
Stop the tool before removing the attachment. Inspect the sleeve and bits, and replace damaged parts.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help checking the fit? Tell Willy your tool, accessory and working dimensions so the GetPipe team can help.
Important Product Questions
Can I use it on a 1-inch insert bit?
The magnetizer is specified for impact driver bits 2 inches and longer. Choose an accessory intended for a shorter bit instead.
Will it hold stainless screws equally well?
Magnetic attraction depends on the screw material. Test the actual screw rather than relying on the attachment to hold every fastener.
Does the attachment control tightening torque?
No. Magnetic retention helps position the screw; follow the assembly’s tightening requirement separately.
