ASC

CT-121 Copper Tubing Riser Clamp Recommended for support and steadying of copper tube risers, either insulated or non-insulated. This product is not intended for use with hanger rods. For support and...

261 Extension Pipe or Riser Clamp For support of stationary steel pipe risers, cast iron pipe or conduit. This product is not intended for use with hanger rods. For this application refer to Fig. 40...

67 Pipe or Conduit Hanger Can be suspended by hanger rod or attached to wall. “T” slot in hanger permits side bolt to be installed after installation and setting of pipe. Strap and bolt...

CT-65 Light Adjustable Clevis Hanger Copper Plated Recommended for suspension of non-insulated, stationary copper tube. Adjustment may be made either before or after tubing is in place without...

65 Light Adjustable Clevis Hanger Recommended for suspension of stationary pipe or conduit. An economical attachment for light duty service. Product Submittal / Data Sheet PDF Anvil Pipe Hangers...

260 Adjustable Clevis Hanger Recommended for the suspension of stationary pipe lines. Design has yoke on outside of lower U-strap so yoke cannot slide toward center of bolt, thus bending of bolt is...

3205 Ductile Iron Straight Tee SCI Ductile Iron Pipe Fittings conform to ASME B16.3 dimensions. Bushings and couplings conform to ASM B16.14. The threads are NPT per ANSI/ASME B1.20.1. Ductile iron...

Clevis Hanger with Insulation Saddle System 260R ISS Recommended for the suspension of stationary insulated chilled or hotwater pipe lines.  V-Block design cradles pipe through out the entire...

Clevis Hanger with Insulation Saddle System 260 ISS Recommended for the suspension of stationary insulated chilled or hotwater pipe lines.  V-Block design cradles pipe through out the entire...

150# Galvanized Malleable Iron Reducing 90° Street Elbows Class 150 Malleable Iron Fittings conform to ASME B16.3 All elbows and tees 3/8" and larger are 100% gas tested at a minimum of 100 PSI...

Carbon Steel Press 45° Degree Street Elbows SCI Press Carbon steel Fittings are intended for use with ASTM A53 carbon steel piping, Sched 10 and 40, in sizes ¾" to 2”. Color-coded...

SS Compression Hex Nut Double Ferrule Instrumentation fittings meet ANSI B31.1, ANSI B31.3, ASME Sec. VIII Instrumentation fitting wall thickness conform to SAE-J-514 NPT pipe threads conform to...

Anti-Siphon Frost Free Sillcock MIP x Sweat 3/4" MHT outlet 1/2" MIP x 1/2" Sweat inlet Chrome plated brass body Vacuum breaker Metal handle (plastic handle available) IAPMO/UPC listed CSA approved...

Brass Gate Valve Lead Free Sweat California AB1953 lead-free approved Meets federal Safe Water Drinking Water Act, lead-free requirement 200LB CWP 125LB WSP Full Port (1/4-3) Cast Brass Non-rising...

125# Bronze Lead-Free Threaded 45° Elbows Bronze fittings conform to AWWA C800 Bronze castings manufactured from ASTM B584 UNS Alloy C89833 ingot Bronze fitting dimensions conform to ASME B16...

J-Hanger 1/2" through 4" NPS Electro-Galvanized Max Temperature: 450° F For the suspension of stationary pipe Max Load: 1/2" - 2-1/2" 150 lbs. Max Load: 3" 200 lbs. Max Load: 4" 250 lbs. Product...

Brass Hose Bibb MIP Inlet 125 lb. CWP NPT x 3/4" NHT Cast brass Heavy duty configuration Green tee handle Certified to NSF/ANSI 61-8 ISO 9001:2008 manufacturer Series 166 Brass No Kink Hose Bibb...

Boiler Drain with Stuffing Box FIP Inlet 125 lb. CWP Full Flow NPT x 3/4" NHT Cast Brass CSA Approved Certified to NSF/ANSI 61-8 ISO 9001:2008 manufacturer Series 102 & 103 Boiler Drain Stuffing...

Series 50C767 - Stainless Steel Ball Valve, Seal Weld Sharpe® polymer-seated, seal-welded, 2-piece ball valves provide superior performance and reliability in a wide range of applications. 3000...

Series 50C747 - Carbon Steel Ball Valve, Seal Weld Sharpe® polymer-seated, seal-welded, 2-piece ball valves provide superior performance and reliability in a wide range of applications. 3000 CWP...

Series 34836 - Stainless Steel Forged Gate Valves Sharpe® metal-seated, forged steel, gate valves provide superior performance and reliability in a wide range of applications. Outside Screw and...

Brass In-Line Check Valve Threaded California AB1953 lead-free approved Meets federal Safe Water Drinking Water Act, lead-free requirement Rated at 200 psi Cast brass Spring loaded Stainless steel...

150# Black Malleable Iron Reducing 90° Street Elbows Class 150 Malleable Iron Fittings conform to ASME B16.3 All elbows and tees 3/8" and larger are 100% gas tested at a minimum of 100 PSI Class...

3000# 316L Stainless Steel Threaded Tee Forged Stainless Steel Conforms to ASTM A-182 Grade F304/304L - F316/316L Forged Stainless Steel Fitting Dimensions Conform to ASME B16.11 NPT Threads Conform...

Schedule 40 316/L Stainless Steel Tee Stainless weld fittings conform to ASTM A403 Grade 316/316L CMTR's available upon request Stainless weld fitting dimensions conform to ASME B16.9 (except Wall)...

Schedule 40 304/L Stainless Steel Tee Stainless weld fittings conform to ASTM A403 Grade 304/304L CMTR's available upon request Stainless weld fitting dimensions conform to ASME B16.9 (except Wall)...

Schedule 10 Tee 316/L Schedule 10 Tee 316/L is a stainless steel butt-weld fitting designed to create a 90-degree branch from a compatible Schedule 10 piping run. SCI identifies the 316/316L...

3000# 304L Stainless Steel Threaded Tee 3000# 304L Stainless Steel Threaded Tee is a forged stainless steel fitting designed to connect three compatible threaded piping runs and create a 90-degree...

3000# 316L Stainless Steel Socket Weld Tee 3000# 316L Stainless Steel Socket Weld Tee is a forged stainless steel fitting designed to connect three compatible socket-weld piping runs, creating a...

3000# 304L Stainless Steel Socket Weld Tee 3000# 304L Stainless Steel Socket Weld Tee is a forged stainless steel three-way fitting designed to create a 90-degree branch from a straight piping run...

SCI® Press - Copper 90° FPT Female Elbow SCI® Press - Copper 90° FPT Female Elbow combines a copper press connection with a female threaded connection while creating a 90-degree...

150# Stainless Steel Cross SCI Heavy Pattern 150# Stainless Steel Crosses provide four threaded connection points for branching, distributing, or combining piping runs in compatible stainless steel...

Stainless Steel Three Piece Threaded Ball Valve ASC Series SC301 Stainless Steel Three Piece Threaded Ball Valves provide dependable quarter-turn shutoff for commercial, industrial, process piping,...

Sanitary Clamp End Short Weld Ferrule ASC / SCI Sanitary Clamp End Short Weld Ferrules provide a sanitary clamp connection point with a compact weld-end section for compatible stainless steel tubing...

Schedule 40 Seamless Red Brass Nipples - Single Run ASC / SCI Schedule 40 Seamless Red Brass Nipples provide a threaded connection between compatible female NPT piping components in plumbing and...

Sanitary Clamp End Reducing Tee ASC / SCI Sanitary Clamp End Reducing Tees provide a three-way branch connection while incorporating a reduced outlet in compatible stainless steel sanitary piping...

Sch10 Stainless Steel Grooved Reducing Tee ASC Gruvlok Sch10 Stainless Steel Grooved Reducing Tees provide a three-way branch connection with a reduced outlet in compatible stainless steel grooved...

Cast Iron Straight Tee ASC / SCI Cast Iron Straight Tees provide a three-way branch connection for compatible threaded piping systems. ASC identifies this product as Figure 3358 – Straight Tee...

Sanitary Weld End Long Tee ASC / SCI Sanitary Weld End Long Tees provide a three-way branch connection for compatible sanitary stainless steel tubing systems. The SCI Sanitary Fittings & Tubing...

150# Cast Stainless Socket Weld Union 316 ASC / SCI 150# Cast 316 Stainless Socket Weld Unions provide a serviceable connection between compatible stainless steel socket-weld piping components. The...