Charman Inc.
Stainless Braided Faucet Connector - 1/2" FIP x 1/2" FIP
- Availability:
- Usually in Stock – Ships Quickly
- Weight:
- 0.00 LBS
Description
Stainless Braided Faucet Connector - 1/2" FIP x 1/2" FIP
Charman Inc Stainless Braided Water Connectors provide a flexible threaded connection for faucet and compatible plumbing installations. This family features 1/2" FIP connections on both ends and is available in 12", 16", 20", 24", 30", and 36" lengths.
The connector uses a 304 stainless steel wire braided hose, brass nuts, and EPDM sealing components. Its flexible construction helps simplify alignment between fixed plumbing connection points while providing a durable, corrosion-resistant exterior braid.
Product Highlights
- Stainless braided water connector
- 1/2" FIP x 1/2" FIP connection configuration
- Female threaded connections on both ends
- 304 stainless steel wire braided hose
- Brass nuts
- EPDM sealing components
- Flexible construction for easier installation and alignment
- Lead-free connector family
- Available in 12", 16", 20", 24", 30", and 36" lengths
Technical Specifications
| Product Type | Stainless Braided Water Connector |
|---|---|
| Brand | Charman Inc |
| Connection Configuration | 1/2" FIP x 1/2" FIP |
| Connection 1 | 1/2" Female Iron Pipe |
| Connection 2 | 1/2" Female Iron Pipe |
| Braided Hose | 304 Stainless Steel Wire |
| Nut Material | Brass |
| Sealing Material | EPDM |
| Available Lengths | 12", 16", 20", 24", 30", and 36" |
| Primary Application | Faucet and Compatible Water Supply Connections |
304 Stainless Steel Braided Construction
The outer braid is constructed from 304 stainless steel wire, providing a durable protective exterior around the flexible connector hose. The braided design allows the connector to accommodate practical routing between fixed plumbing connection points.
Brass nuts and EPDM sealing components complete the connection assembly for compatible water-supply installations.
Understanding the Connection Configuration
This connector has 1/2" FIP connections on both ends. Each female threaded pipe connection is designed to mate with a compatible 1/2" male threaded connection.
Because all six variants use the same connection configuration, the primary difference between them is overall connector length.
Available Connector Lengths
- 12" - SKU 153012-NL
- 16" - SKU 153016-NL
- 20" - SKU 153020-NL
- 24" - SKU 153024-NL
- 30" - SKU 153030-NL
- 36" - SKU 153036-NL
Choosing the Correct Length
Measure the distance and planned routing between the water-supply connection points before selecting a connector. Choose a length that provides adequate reach without requiring excessive tension, sharp bending, or unnecessary looping.
Available lengths range from 12" through 36", allowing the same 1/2" FIP x 1/2" FIP connection configuration to be used across several installation layouts.
Common Applications
Faucet & Fixture Connections
- Faucet supply connections
- Fixture water-supply connections
- Replacement flexible connectors
- Residential plumbing installations
- Commercial plumbing installations
Flexible Plumbing Connections
- Connections where rigid alignment is difficult
- Equipment-to-supply transitions
- Plumbing maintenance and repair
- New fixture installations
- Replacement of compatible threaded connectors
Ask Willy: Need Braided Water Connector Help?
Review the Stainless Steel Braided Water Connector specification sheet for connection and material information, or use the Charman Inc catalog to compare available braided connector sizes, lengths, and configurations before ordering.
Installation & Selection Guidance
- Confirm that the required connection configuration is 1/2" FIP x 1/2" FIP.
- Verify that both FIP ends mate with compatible 1/2" male threaded connections.
- Select the connector length appropriate for the installation distance and routing.
- Do not stretch the connector to reach between connection points.
- Avoid sharp bends, kinks, crushing, or twisting of the braided hose.
- Inspect the connector, nuts, sealing components, and braid before installation.
- Do not install a connector that is visibly damaged.
- Align threaded connections carefully to avoid cross-threading.
- Use sealing practices appropriate for the plumbing connection.
- Check completed connections for leaks before placing the system into service.
- Follow applicable plumbing codes, fixture instructions, and local requirements.
- Installation should be performed by qualified personnel.
Product Selection Considerations
Connection Compatibility
Both ends use 1/2" FIP connections. Confirm that both mating connection points provide compatible 1/2" male pipe threads before ordering.
Length & Routing
Select from 12", 16", 20", 24", 30", or 36" according to the required connection distance. Choose a length that allows natural routing without excessive tension or looping.
Need Help Selecting a Braided Water Connector?
Our PVF specialists can help review your threaded connection requirements, connector length, fixture, and installation configuration before you order.
Frequently Asked Questions
What connections does this braided connector have?
This connector has 1/2" FIP female threaded connections on both ends.
What lengths are available?
This listing includes 12", 16", 20", 24", 30", and 36" lengths.
What is the braided exterior made from?
The connector uses 304 stainless steel wire braiding.
What are the nuts made from?
The connector uses brass nuts.
What sealing material is used?
EPDM sealing components are used in the connector assembly.
What does FIP mean?
FIP identifies a female threaded pipe connection designed to mate with a compatible male threaded pipe connection.
Are the connection sizes different between variants?
No. Every variant uses the same 1/2" FIP x 1/2" FIP configuration. Only the connector length changes.
How do I choose the correct connector length?
Measure the required connection path and select a length that provides adequate reach without stretching the connector or creating unnecessary loops.
Should the connections be checked for leaks?
Yes. Check completed plumbing connections for leakage before placing the fixture or system into service.
Where can I find additional connector information?
Use the Charman Inc Stainless Steel Braided Water Connector specification sheet and catalog linked in the Willy section for additional product and selection information.
Important Ordering Notes
- This listing is for 1/2" FIP x 1/2" FIP stainless braided water connectors.
- Available lengths are 12", 16", 20", 24", 30", and 36".
- All variants use the same 1/2" FIP x 1/2" FIP connection configuration.
- Confirm the required connector length before ordering.
- Confirm compatible 1/2" male threaded mating connections before ordering.
- Inspect the connector and sealing components before installation.
- Check completed connections for leaks before use.
- Review the linked specification sheet and Charman Inc catalog for additional product information.
- Installation should comply with applicable plumbing codes and local requirements.
