Charman Inc.
Stainless Braided Faucet Connector - 3/8" Compression x 1/2" FIP
- Availability:
- Usually in Stock – Ships Quickly
- Weight:
- 0.00 LBS
Description
Stainless Braided Faucet Connector - 3/8" Compression x 1/2" FIP
Charman Inc Stainless Braided Faucet Water Connectors provide a flexible water-supply connection for faucets and compatible plumbing fixtures. This family features a 3/8" compression connection on one end and a 1/2" FIP connection on the other and is available in lengths from 12" through 60".
The connector features a 304 stainless steel wire braided hose, brass nut, EPDM washer, and chrome brass nut. The flexible braided construction helps simplify routing and alignment between the water-supply connection and fixture while providing a durable protective exterior.
Product Highlights
- Stainless braided faucet water connector
- 3/8" Compression x 1/2" FIP connection configuration
- 304 stainless steel wire braided hose
- Brass nut construction
- Chrome brass nut
- EPDM washer
- Flexible design for easier installation and alignment
- cUPC Certified
- No-lead connector family
- Available in 12", 16", 20", 24", 30", 36", 48", and 60" lengths
Technical Specifications
| Product Type | Stainless Braided Faucet Water Connector |
|---|---|
| Brand | Charman Inc |
| Connection Configuration | 3/8" Compression x 1/2" FIP |
| Connection 1 | 3/8" Compression |
| Connection 2 | 1/2" Female Iron Pipe |
| Braided Hose | 304 Stainless Steel Wire |
| Washer | EPDM |
| Nut | Brass |
| Feature | Chrome Brass Nut |
| Certification | cUPC Certified |
| Available Lengths | 12", 16", 20", 24", 30", 36", 48", and 60" |
304 Stainless Steel Braided Construction
The flexible hose is protected by a 304 stainless steel wire braid. The braided exterior provides durable protection while allowing the connector to route between fixed water-supply and fixture connection points.
Brass connection components and an EPDM washer complete the assembly, while the 3/8" compression x 1/2" FIP configuration is designed for compatible faucet and water-supply installations.
Connection Configuration
3/8" Compression
One end provides a 3/8" compression connection for attachment to a compatible water-supply connection.
1/2" FIP
The opposite end provides a 1/2" female threaded pipe connection designed to mate with a compatible 1/2" male threaded connection.
Available Connector Lengths
- 12" - SKU 143012-NL
- 16" - SKU 143016-NL
- 20" - SKU 143020-NL
- 24" - SKU 143024-NL
- 30" - SKU 143030-NL
- 36" - SKU 143036-NL
- 48" - SKU 143048-NL
- 60" - SKU 143060-NL
Every length uses the same 3/8" Compression x 1/2" FIP connection configuration. Select the connector according to the required installation distance and routing.
Choosing the Correct Length
Measure the connection path between the water supply and fixture before selecting a connector. Choose a length that provides adequate reach without stretching the hose or creating excessive bends or unnecessary loops.
Lengths from 12" through 60" provide options for both close-coupled connections and installations requiring additional routing distance.
Common Applications
Faucet Water Connections
- Faucet water-supply connections
- Compatible plumbing fixtures
- Replacement faucet supply connectors
- Residential plumbing installations
- Commercial plumbing installations
Flexible Supply Connections
- Connections where rigid alignment is difficult
- New faucet installations
- Plumbing maintenance and repair
- Fixture replacement projects
- Compatible 3/8" compression to 1/2" FIP transitions
Ask Willy: Need Braided Water Connector Help?
Review the Stainless Steel Braided Water Connector specification sheet for connection and material information, or use the Charman Inc catalog to compare available braided connector sizes, lengths, and configurations before ordering.
Installation & Selection Guidance
- Confirm that the required configuration is 3/8" Compression x 1/2" FIP.
- Verify compatibility of both mating connections before installation.
- Select a connector length that provides adequate reach without stretching the hose.
- Avoid sharp bends, kinks, crushing, or twisting of the braided connector.
- Inspect the braid, nuts, washer, and connection surfaces before installation.
- Do not install a connector that is visibly damaged.
- Align connections carefully to prevent cross-threading or connection damage.
- Avoid excessive tightening that could damage the fitting or sealing components.
- Check completed water connections for leaks before placing the fixture into service.
- Follow applicable plumbing codes, fixture instructions, and local requirements.
Product Selection Considerations
Connection Compatibility
Confirm that the installation requires a 3/8" compression connection on one end and a 1/2" FIP connection on the other. Connection type is just as important as nominal size when selecting a replacement connector.
Length & Routing
Select from 12", 16", 20", 24", 30", 36", 48", or 60" according to the required connection path. Choose a length that allows natural routing without excessive tension or looping.
Need Help Selecting a Braided Water Connector?
Our PVF specialists can help review your compression and threaded connection requirements, required connector length, fixture, and installation configuration before you order.
Frequently Asked Questions
What connections does this faucet connector have?
This connector has a 3/8" compression connection on one end and a 1/2" FIP connection on the opposite end.
What lengths are available?
This listing includes 12", 16", 20", 24", 30", 36", 48", and 60" lengths.
What is the braided hose made from?
The hose uses 304 stainless steel wire braiding.
What is the washer made from?
The washer is EPDM.
What is the nut made from?
The nut is brass, and the connector features a chrome brass nut.
Is this faucet connector cUPC certified?
Yes. The faucet water connector is cUPC Certified.
What does FIP mean?
FIP identifies a female threaded pipe connection designed to mate with a compatible male threaded pipe connection.
Are the connection sizes different between the length variants?
No. All variants use the same 3/8" Compression x 1/2" FIP configuration. Only the connector length changes.
How do I select the correct length?
Measure the required connection path and choose a length that provides adequate reach without stretching the hose or creating unnecessary loops.
Should the completed connection be checked for leaks?
Yes. Check completed plumbing connections for leakage before placing the fixture into service.
Important Ordering Notes
- This listing is for 3/8" Compression x 1/2" FIP stainless braided faucet connectors.
- Available lengths are 12", 16", 20", 24", 30", 36", 48", and 60".
- All variants use the same connection configuration.
- Confirm both connection type and size before ordering.
- Confirm the required connector length before ordering.
- Inspect the connector and sealing components before installation.
- Check completed water connections for leaks before use.
- Review the linked specification sheet and Charman Inc catalog for additional product information.
