ASC
SCI® Press - Copper MPT Male Reducing Adapter
- SKU:
- SP607R
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
SCI® Press - Copper MPT Male Reducing Adapter
SCI® Press - Copper MPT Male Reducing Adapter provides a transition from compatible copper tubing to a smaller male threaded connection, combining an SCI Press connection on one end with a reducing male threaded connection on the other.
Identified by SCI as Fig. SP607R, this fitting uses a Press x Male Threaded Reducing configuration. It provides a compact transition between an SCI Press Copper piping system and a compatible female threaded component when the required threaded connection is smaller than the copper press connection.
Product Highlights
- SCI® Press Copper MPT Male Reducing Adapter
- SCI Fig. SP607R
- Press x Male Threaded reducing configuration
- Transitions copper press piping to a smaller male threaded connection
- Designed to connect to a compatible female threaded component
- Copper alloy body conforming to UNS C12200
- Grade “E” peroxide-cured EPDM sealing element at the press connection
- EPDM operating temperature range of -20°F to 248°F
- Designed for compatible ASTM B88 copper tubing
- Compatible with common pressing tools and jaws
- IAPMO UPC PS-117, NSF/ANSI 61, and NSF/ANSI 372 approvals/certifications
- Provides a mechanical press connection without conventional soldering or brazing
Technical Specifications
| Product Type | Copper Press MPT Male Reducing Adapter |
|---|---|
| Brand | SCI® Press |
| Figure | SP607R |
| Connection | Press x Male Threaded - Reducing |
| Press Side | SCI Press Copper Connection |
| Adapter Side | Male Threaded Reducing Connection |
| Configuration | Reducing Press-to-Threaded Adapter |
| Body Material | Copper Alloy |
| Body Material Specification | UNS C12200 |
| Press-End O-Ring | Grade “E” EPDM, Peroxide Cured |
| EPDM Temperature Range | -20°F to 248°F |
| Copper Tubing Standard | ASTM B88 |
| Water Systems | 300 PSI; 600 PSI Test Pressure |
| Approvals & Certifications | IAPMO UPC PS-117, NSF/ANSI 61, NSF/ANSI 372 |
Construction Details
The SCI® Press Copper MPT Male Reducing Adapter is manufactured from copper alloy conforming to UNS C12200. The SP607R combines an SCI Press copper connection with an integral reducing male threaded connection.
The press connection incorporates a Grade “E” peroxide-cured EPDM sealing element with silicone grease. SCI specifies an operating temperature range of -20°F to 248°F for the EPDM sealing material.
The reducing configuration allows compatible copper tubing to transition directly to a smaller male threaded connection within one fitting, providing a useful interface between press-connected copper piping and compatible female threaded components.
Important: SCI states that fluids containing hydrocarbon-based oils are not compatible with the EPDM seal and that SCI Press Copper EPDM fittings are not for use in petroleum applications.
Press-to-Male Threaded Reducing Transition
SCI Press Connection
The press side accepts compatible ASTM B88 copper tubing and is mechanically joined using an appropriate pressing tool and jaw.
Reducing Male Threaded Connection
The opposite end provides the smaller male threaded connection for joining the adapter to a compatible female threaded valve, fitting, equipment connection, or other component.
Integrated Size Reduction
The SP607R combines a press-to-threaded transition and size reduction in a single fitting. This is useful where the copper piping connection is larger than the required male threaded connection.
By incorporating the reduction directly into the adapter, the fitting can help simplify layouts that might otherwise require a standard press adapter together with an additional threaded reducing fitting.
The result is a compact transition point between compatible SCI Press Copper piping and a smaller female threaded component.
SP607R vs. SP607 Male Adapter
SP607R Reducing Adapter
The SP607R is designed for connection combinations where the press connection and male threaded connection differ in size, providing the reduction within the adapter itself.
SP607 Male Adapter
The SP607 is the standard Copper MPT Male Adapter configuration. Select the SP607R when the piping layout requires a reducing press-to-male-threaded transition.
SCI® Press Copper Connection
SCI Press Technology provides a mechanical copper piping connection that eliminates the need for conventional soldering or brazing at the press joint. The system is compatible with common pressing tools and jaws.
SCI Press Copper Fittings are intended for use with ASTM B88 Types K, L, and M hard copper tubing from 1/2" through 4" and soft copper tubing from 1/2" through 1-1/4" within the applicable SCI Press fitting range.
SCI states that its Press Copper fittings are approved for installations above and below ground where permitted by applicable local building codes.
ASTM B88 Copper Tubing Compatibility
Hard Copper Tubing
The SCI Press Copper system is intended for use with ASTM B88 Types K, L, and M hard copper tubing in compatible SCI Press system sizes.
Soft Copper Tubing
SCI also specifies compatibility with ASTM B88 soft copper tubing in applicable system sizes. Confirm the selected SP607R adapter and tubing combination before installation.
EPDM Sealing Element
The press connection in the SCI Press Copper system uses a peroxide-cured Grade “E” EPDM O-ring. SCI lists an operating temperature range of -20°F to 248°F for this sealing material.
The EPDM seal is recommended by SCI for water service, diluted acids, alkaline solutions, oil-free air, and many other compatible chemical services.
Fluids containing hydrocarbon-based oils are not compatible with the EPDM seal. Do not use SCI Press Copper EPDM fittings in petroleum applications.
Selected Service Ratings
| Water Systems | 300 PSI; Test Pressure 600 PSI; -20°F to 248°F |
|---|---|
| Residential Steam | 5 PSI Maximum; 227°F |
| Compressed Air | 200 PSI Maximum; 140°F Maximum; oil concentration ≤25 mg/m³ |
| Nitrogen | 200 PSI Maximum; 140°F Maximum |
| Carbon Dioxide | 200 PSI Maximum; 140°F Maximum |
| Carbon Monoxide | 200 PSI Maximum; 140°F Maximum |
| Argon | 200 PSI Maximum; 140°F Maximum |
| Non-Medical Oxygen | 140 PSI Maximum; 140°F Maximum; keep free of oil and grease |
| Hydrogen | 125 PSI Maximum; 140°F Maximum |
| Vacuum - Differential Pressure | 29.2" Hg Maximum; 160°F Maximum |
Approvals & Certifications
IAPMO UPC PS-117
SCI identifies its Press Copper fitting system with IAPMO UPC PS-117 approval.
NSF/ANSI 61
The SCI Press Copper fitting system carries NSF/ANSI 61 certification for applicable drinking-water applications.
NSF/ANSI 372
SCI also identifies NSF/ANSI 372 certification for its Press Copper fitting system.
Typical Applications
Plumbing & Water Systems
- Potable water systems
- Residential plumbing
- Commercial plumbing
- Mechanical copper systems
- Reducing press-to-threaded transitions
Equipment & Component Connections
- Compatible female threaded valves
- Female threaded fittings
- Equipment connections
- Oil-free compressed air systems
- Copper systems requiring a smaller male threaded connection
Installation & Selection Considerations
- Confirm both the press connection size and reducing male threaded connection size before ordering the SP607R.
- Verify that the copper tubing complies with ASTM B88 and is compatible with the selected SCI Press fitting.
- Inspect the fitting, EPDM sealing element, and tubing before assembly and follow the supplied SCI Press installation instructions.
- Use a compatible pressing tool and jaw for the press connection and properly assemble the male threaded end with the mating female threaded component.
- Verify EPDM compatibility with the intended fluid and do not use the fitting in petroleum applications.
Use the supplied SCI Press documents to confirm the SP607R reducing press-to-male-threaded configuration, copper tubing compatibility, EPDM service requirements, system ratings, approvals, pressing procedures, and installation requirements.
SCI Press Copper Fittings Submittal PDF SCI Press Copper Installation Instructions PDF SCI Copper Press Product Flyer PDFNeed Help Selecting an SCI® Press Copper MPT Male Reducing Adapter?
Our fitting specialists can help review your press connection size, reducing male threaded connection, copper tubing, press-tool compatibility, service conditions, EPDM compatibility, and installation requirements before you order.
Frequently Asked Questions
What is the SCI figure number for the Copper MPT Male Reducing Adapter?
SCI identifies the Copper MPT Male Reducing Adapter as Fig. SP607R.
What connection configuration does the SP607R use?
The SP607R combines an SCI Press copper connection with a reducing male threaded connection.
What is the purpose of the SP607R?
It provides a transition from compatible copper tubing to a smaller male threaded connection for joining the press system to a compatible female threaded component.
How is the SP607R different from the SP607?
The SP607R is the reducing version. It is used when the press connection and male threaded connection differ in size, while the SP607 is the standard male adapter configuration.
What material is the adapter made from?
SCI specifies a copper alloy body conforming to UNS C12200.
What type of seal does the press connection use?
The SCI Press Copper system uses a peroxide-cured Grade “E” EPDM sealing element with an operating temperature range of -20°F to 248°F.
What copper tubing is compatible with the SCI Press system?
SCI specifies ASTM B88 Types K, L, and M hard copper tubing from 1/2" through 4" and soft copper tubing from 1/2" through 1-1/4" for the overall SCI Press Copper system.
What is the water-system rating?
SCI publishes a 300 PSI rating for water systems with a 600 PSI test pressure and an EPDM service temperature range of -20°F to 248°F.
Can SCI Press Copper fittings be used for petroleum applications?
No. SCI states that fluids containing hydrocarbon-based oils are not compatible with the EPDM seal and that these fittings are not for use in petroleum applications.
Does the press connection require soldering or brazing?
No. SCI Press Technology provides a mechanical press connection that eliminates conventional soldering or brazing at the press joint.
What certifications does the SCI Press Copper system carry?
SCI identifies IAPMO UPC PS-117, NSF/ANSI 61, and NSF/ANSI 372 approvals and certifications for the system.
Important Ordering & Installation Notes
- This listing is for the SCI® Press - Copper MPT Male Reducing Adapter, Fig. SP607R.
- Confirm both the press connection size and reducing male threaded connection size before ordering.
- Verify the copper tubing and intended service are compatible with the SCI Press system and Grade “E” EPDM sealing element.
- Do not use SCI Press Copper EPDM fittings in petroleum applications.
- Follow the supplied SCI Press installation instructions and applicable local code requirements when assembling, pressing, and testing the completed system.
