Spears
PVC DWV 90 Degree P-Trap Elbow (H x S)
- SKU:
- P335
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
PVC DWV 90 Degree P-Trap Elbow (H x S)
PVC DWV 90 Degree P-Trap Elbow (H x S) provides a 90-degree directional transition within a compatible P-trap or fixture drainage arrangement. The fitting combines a hub connection with a spigot connection to connect compatible PVC DWV components within a compact elbow configuration.
The H x S 90 degree P-trap elbow configuration combines two different connection interfaces within one PVC DWV fitting. Selection should account for nominal size, hub and spigot compatibility, adjoining components, elbow orientation, joining requirements, piping alignment, support, and available installation clearance.
Product Highlights
- PVC construction
- DWV fitting design
- 90° elbow configuration
- Hub x spigot connections
- Designed for P-trap arrangements
- Provides a compact directional transition
- Connects compatible PVC DWV components
- Combines hub and spigot interfaces within a 90-degree fitting
Technical Specifications
| Product Type | P-Trap Elbow |
|---|---|
| Material | PVC |
| System Type | DWV |
| Connection | Hub x Spigot (H x S) |
| Connection Count | Two |
| Fitting Configuration | 90° Elbow |
| Hub Interface | Compatible PVC DWV Pipe |
| Spigot Interface | Compatible Receiving Hub |
| Joining Method | Compatible PVC DWV Joining Procedure |
| Directional Change | 90° |
| Piping Configuration | P-Trap / Fixture Drainage Transition |
| Primary Function | Provide a 90-Degree Transition Within Compatible PVC DWV Piping |
P-Trap Elbow Design
The P-trap elbow configuration provides a 90-degree directional change within a compatible trap or fixture drainage arrangement. The compact elbow design helps connect adjoining components where the piping path must turn within limited installation space.
The elbow orientation should be established before permanent joining so both connections align with the intended drainage layout. Planning the position helps coordinate trap components, adjoining piping, nearby fittings, and available working clearance.
Hub & Spigot Connections
The hub connection receives appropriately sized compatible PVC DWV pipe, while the spigot connection fits into an appropriately sized compatible receiving hub. Each connection should be matched to the intended adjoining component before assembly.
The mating surfaces should be prepared using the appropriate PVC DWV joining procedure. Proper insertion, compatible joining materials, correct elbow orientation, and careful alignment help establish the connections without unnecessary stress on the fitting.
PVC DWV Integration
The PVC DWV construction allows the P-trap elbow to integrate into compatible drain, waste, and vent piping arrangements requiring a compact directional transition. Matching the nominal size and connection interfaces to the adjoining components helps maintain the intended drainage configuration.
Application suitability should be evaluated using the requirements of the complete DWV system. Adjoining materials, connection compatibility, trap arrangement, joining materials, piping support, and local installation requirements should all be considered during fitting selection.
90° Directional Transition
A PVC DWV 90 Degree P-Trap Elbow redirects the connected piping through a right-angle transition while maintaining hub and spigot connection interfaces. This arrangement can help create a compact connection within compatible fixture drainage assemblies.
Installation planning should consider elbow orientation, spigot engagement, adjoining pipe alignment, nearby components, available clearance, and piping support. Connected components should align naturally without forcing the fitting into position.
Installation & Selection Considerations
- Confirm the nominal size.
- Verify the H x S arrangement.
- Check PVC DWV compatibility.
- Confirm the required 90° orientation.
- Align adjoining components before assembly.
Our PVC fitting specialists can help review your nominal size, DWV requirements, H x S configuration, adjoining PVC components, P-trap arrangement, elbow orientation, joining requirements, piping alignment, and available installation clearance before you order.
Frequently Asked Questions
What is a PVC DWV 90 Degree P-Trap Elbow used for?
It provides a 90-degree directional transition within a compatible P-trap or fixture drainage arrangement.
What does H x S mean?
It identifies a hub connection at one end and a spigot connection at the other.
What connects to the hub end?
The hub end receives appropriately sized compatible PVC DWV pipe.
What connects to the spigot end?
The spigot end fits into an appropriately sized compatible receiving hub.
Does elbow orientation matter?
Yes. The elbow should be positioned so the 90-degree transition corresponds with the intended P-trap or drainage layout.
What should I confirm before ordering?
Confirm the nominal size, H x S arrangement, PVC DWV compatibility, and required elbow orientation.
Important Ordering & Installation Notes
- Inspect both connections before use.
- Confirm the nominal connection size.
- Verify the H x S arrangement.
- Prepare adjoining components correctly.
- Set the elbow orientation before assembly.
