Milwaukee
Milwaukee Tool Shockwave Impact Slotted 1/8" Insert Bits (25PK)
- SKU:
- MLW48-32-4116
- Availability:
- Usually Ships Same Day
- Weight:
- 0.26 LBS
Description
DUTY®
1/8 in Slotted
Insert Driver Bit
Keep a 1/8 in Slotted replacement ready for repeat fastening, and match the bit format to your tool setup.
Product Overview
Match the 1/8 in Slotted tip to the screw recess; screw diameter alone does not identify the bit.
Use the insert format with a compatible holder; keep replacement tips ready for repeat work.
- ShockzoneHelps manage peak torque.
- Wear Guard tipHelps preserve bit fit.
- Precision tip fitHelps reduce wobble.
- Easy selectionLaser-etched sizing.
Technical Specifications
- Tip style
- Slotted
- Tip size
- 1/8 in
- Bit format
- Insert bit
- Material
- Custom Alloy76 steel
- Torque relief
- Optimized Shockzone
- Size marking
- Laser-etched
Choose the Correct Fit
Match the 1/8 in Slotted tip to the screw recess. Clean out paint, dirt or metal chips so the bit can seat fully.
Fit this insert bit into a holder with matching shank and retention. Check that it is secure before operating the tool.
Installation & Care
Check working clearance before driving. Start slowly, then use only the force needed to seat the fastener.
Inspect the tip between tasks. Replace a rounded, cracked or twisted bit; increasing pressure will not restore its fit.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need a matching bit? Tell Willy the screw recess, size and access space so the GetPipe team can check your choice.
Important Product Questions
Can I substitute another tip profile?
Choose the specified Slotted profile and 1/8 in size. A different recess shape or a nearby size may appear to engage but can slip and damage the screw.
What if the bit slips under load?
Stop and check the screw recess, tip condition and tool alignment. A damaged recess or wrong fit can cause slipping; forcing it may make removal harder.
Does impact duty set the screw torque?
No. Follow the torque requirement for the fastener and assembly. An impact-rated bit does not limit torque or prevent damage from overtightening.
