Milwaukee
Milwaukee Tool SHOCKWAVE Impact Duty 1" Drive to 1-1/2" Drive Adapter
- SKU:
- MLW49-66-6732
- Availability:
- Usually Ships Same Day
- Weight:
- 2.40 LBS
Description
DUTY®
1 in to 1-1/2 in
Impact Adapter
A square-drive adapter connecting a 1-inch impact wrench to 1-1/2-inch drive impact sockets.
Product Overview
The 1-inch input connects to the impact wrench; the 1-1/2-inch output accepts the matching socket drive.
A ball detent retains the socket, while dual holes and a groove support attachment at the tool-side drive.
- Drive conversionAdapts square-drive sizes.
- Socket retentionBall detent retains the socket.
- Tool attachmentDual holes and groove.
- Clear identificationLaser-etched drive sizes.
Technical Specifications
- Input drive
- 1 in square
- Output drive
- 1-1/2 in square
- Socket retention
- Ball detent
- Tool attachment
- Dual hole and groove
- Identification
- Laser etched
- Tool compatibility
- Impact wrenches
Choose the Correct Fit
Match the input to a 1-inch square-drive impact wrench. Check that the socket uses the specified output drive size.
Seat the 1-1/2-inch drive socket fully on the output and check the ball detent. Secure the input using the tool’s retaining arrangement.
Installation & Care
Keep the tool, adapter and socket aligned. Follow the limits for every part of the setup; a drive-size change does not create additional torque capacity.
Inspect both square-drive interfaces and the retention features. Replace a cracked, distorted or loose-fitting adapter before use.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help matching square drives? Tell Willy the drive size on your impact wrench and your socket so the GetPipe team can check the adapter.
Important Product Questions
Is this a socket for a bolt head?
No. It changes a 1-inch square drive to a 1-1/2-inch square drive. A separate impact socket fits the fastener.
Can it be used in reverse?
Select an adapter with the correct input and output for the tool and socket. This model’s input is 1 inch; the specified output faces the socket.
Does it change the tool’s torque rating?
No. Use the tool, adapter and socket within their own limits. This listing does not state a numeric torque capacity for the adapter.
