Milwaukee
Milwaukee Tool High-Leverage Lineman's Pliers with Crimper
- SKU:
- MLW48-22-6500
- Availability:
- Usually Ships Same Day
- Weight:
- 1.11 LBS
Description
DUTY®
9" High-Leverage
Lineman’s + Crimper
A 9-inch lineman’s plier with an integrated terminal crimper for combining wire handling and connection preparation.
Product Overview
Choose the head for the access path and operation; leave room for a full handle stroke.
Check wire type and size before cutting; tool length or jaw opening is not a capacity.
- Leverage designLeverage aids cutting.
- Hardened edgesTreated cutting edges.
- Terminal crimperInsulated or bare types.
- Forged bodyFor repeated hand use.
Technical Specifications
- Nominal length
- 9 in
- Head form
- Lineman's
- Construction
- Forged
- Edge treatment
- Induction-hardened
- Additional function
- Terminal crimper
- Surface protection
- Rust-resistant
Choose the Correct Fit
Use the exact cutting or gripping area intended for the task. Avoid prying or twisting sideways with the cutting edges.
Verify wire size and material against the manufacturer’s limits. Do not use jaw opening as a substitute for a cutting-capacity rating.
Installation & Care
De-energize and verify circuits before wire work. Do not infer electrical insulation from a colored or covered handle.
Clean the pivot and inspect cutting edges for chips or misalignment. Support the offcut and wear eye protection when clipping wire.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help choosing? Tell Willy your material, required size and working clearance so the GetPipe team can check the fit.
Important Product Questions
Can I cut hardened screws or steel cable?
Verify the exact material, diameter and hardness rating before cutting. A tool described for wire does not automatically cover every screw, steel cable or hardened fastener.
Are covered grips enough for electrical work?
Grip covering is not proof of an insulation rating. De-energize and verify the circuit, and follow the required electrical-safety procedure.
Can I crimp any size terminal?
Match terminal construction and wire gauge to the crimp profile. Follow the connector maker’s instructions and inspect the completed crimp.
