Milwaukee
Milwaukee Tool Feed Screw Coarse Thread
- SKU:
- MLW48-28-6870
- Availability:
- Usually Ships Same Day
- Weight:
- 0.03 LBS
Description
DUTY®
Coarse-Thread
Feed Screw
A 1/4 in replacement feed screw for 1–2-9/16 in Selfeed bits used in softwood and plywood.
Product Overview
The coarse-thread screw sits at the bit center, piloting the cut and drawing the bit into wood.
Match the Selfeed bit size before replacement. Inspect the feed screw and its retention together.
- Screw diameter1/4 in.
- Bit range1–2-9/16 in Selfeed bits.
- Thread styleCoarse feed thread.
- Wood selectionSoftwood and plywood.
Technical Specifications
- Screw size
- 1/4 in
- Bit family
- Selfeed
- Bit diameter
- 1–2-9/16 in
- Thread style
- Coarse
- Work materials
- Softwood / plywood
- Mounting position
- Bit center
Choose the Correct Fit
Check the bit family and diameter before ordering. This screw is specified for Selfeed bits from 1 to 2-9/16 in.
Disconnect the drill from power before servicing the bit. Follow the bit’s screw-removal procedure and keep the retaining hardware controlled.
Installation & Care
Seat the replacement correctly and confirm that its retention is secure. Inspect the cutting edge as well as the feed screw before drilling.
Use the coarse-thread version for its stated softwood and plywood applications. Replace damaged screws and store the bit with its cutting point protected.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Tell Willy the Selfeed bit diameter and wood type to check the replacement feed screw.
Important Product Questions
Does it fit larger Selfeed bits?
The stated fit is 1–2-9/16 in Selfeed bits. Select the specified replacement screw for larger bits.
Which wood applications suit this thread?
This coarse-thread version is specified for softwood and plywood. Match the screw to the work rather than substituting by appearance.
Should I inspect anything besides the worn screw?
Yes. Check the screw retention and bit cutting edge before installing a replacement, then follow the bit’s setup instructions.
