Milwaukee
Milwaukee Tool Feed and Set Screw Accessory Set
- SKU:
- MLW48-25-6000
- Availability:
- Usually Ships Same Day
- Weight:
- 0.16 LBS
Description
DUTY®
Feed & Set
Screw Kit
A replacement feed-and-set-screw kit for 1–2-9/16 in Selfeed drill bits, with a hex key for change-outs.
Product Overview
Aggressive center feed screws draw the bit into wood. Set screws secure the service arrangement.
Match the bit family and diameter before fitting the replacements; inspect the cutting edge too.
- Bit size group1–2-9/16 in Selfeed bits.
- Feed designAggressive center screw.
- Retention serviceReplacement set screws.
- Change-out toolHex key included.
Technical Specifications
- Bit family
- Standard Selfeed
- Bit diameter
- 1–2-9/16 in
- Feed design
- Aggressive thread
- Feed position
- Bit center
- Retention
- Set screws
- Service hex
- 1/8 in
Choose the Correct Fit
Confirm standard Selfeed bits in the 1–2-9/16 in size group. Match the original parts and do not assume fit with a different bit family.
Disconnect the drill from power before servicing the bit. Use the correct hex interface and keep the small retaining parts from being lost.
Installation & Care
Replace the worn feed and set screws according to the bit instructions. Seat each part securely and inspect the cutting edge before reuse.
Keep the replacement screws and hex key organized by bit-size group. Clean wood debris from the service areas and replace damaged components.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Send Willy the Selfeed bit number and diameter to check the correct feed-and-set-screw kit.
Important Product Questions
How do I choose between the small and large kits?
This kit is for 1–2-9/16 in Selfeed bits. Match the actual bit diameter and family before ordering.
Does this kit renew a worn cutting edge?
It replaces feed and set screws. Inspect and maintain the bit’s cutting edge separately according to its instructions.
Which hex interface is used for this size group?
The manufacturer’s standard Selfeed accessory table specifies a 1/8 in maintenance hex key for this bit-size group. Confirm the screw interface before applying force.
