Milwaukee
Milwaukee Tool EXACT 7/8" SINK Punch
- SKU:
- MLW49-16-2706
- Availability:
- Usually Ships Same Day
- Weight:
- 0.14 LBS
Description
DUTY®
7/8 in Sink
EXACT Punch
Prepare a 7/8 in sink opening with the matching EXACT die and a compatible drive setup.
Product Overview
Pair this 7/8-inch EXACT sink punch with die 49-16-2705 for stainless steel up to 16 gauge.
Two cutting teeth split the slug; large size marks and a gripping surface help with setup.
- Sink opening7/8 in finished-hole size.
- Stainless workRated up to 16 gauge.
- Split slugTwo-tooth cutting geometry.
- Grip surfaceHelps threading and removal.
Technical Specifications
- Hole size
- 7/8 in
- Stainless limit
- 16 gauge
- Matching die
- 49-16-2705
- Cutting geometry
- Two tooth
- Size marking
- Large ID
- Punch grip
- Gripping surface
Choose the Correct Fit
Match the sink’s required 7/8 in opening and material thickness. Sink-punch sizing differs from nominal conduit sizing.
Use die 49-16-2705 and the draw stud and drive listed for the complete setup. Do not infer the stud from hole size alone.
Installation & Care
Secure the work and assemble the punch and die with hands clear of the cutting faces. Follow the drive instructions and engage all threads fully.
Remove the split slug after punching. Inspect the punch edges and threads before reuse, and replace damaged parts.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need a sink-hole match? Tell Willy the required hole diameter, sink material and thickness, and your drive setup.
Important Product Questions
Is this a conduit-size punch?
This is a sink punch identified by its opening size. Do not substitute a nominal conduit punch simply because the number looks similar.
How thick can the stainless sink be?
Milwaukee rates this exact sink punch for up to 16 gauge stainless steel. Confirm the complete tool setup is also rated for the work.
Does this include the matching die?
This listing is the punch. Its matching sink die is 49-16-2705; verify the die and draw-stud setup before ordering.
