Milwaukee
Milwaukee Tool 5/16" Glass and Tile Bit
- SKU:
- MLW48-20-8983
- Availability:
- Usually Ships Same Day
- Weight:
- 0.03 LBS
Description
DUTY®
Glass & Ceramic Tile
5/16 in Drill Bit
Start clean holes in glass and ceramic tile with a precision-ground carbide cutting head.
Product Overview
An Exact Start tip locates the hole. Sharpened carbide and a reinforced head support drilling.
Use a drill/driver on glass and ceramic tile. Milwaukee does not recommend these for porcelain.
- Accurate startsTip helps reduce bit walking.
- Carbide edgePrecision-ground cutting head.
- Reinforced headSupports repeated tile drilling.
- Material matchGlass and ceramic tile use.
Technical Specifications
- Diameter
- 5/16 in
- Head
- Sharpened carbide
- Start tip
- Exact Start
- Tool
- Drill/driver
- Materials
- Glass / ceramic tile
- Shank
- 3-flat
Choose the Correct Fit
Confirm the surface is glass or ceramic tile rather than porcelain. Match the diameter to the required fixing.
Use a drill/driver and support the work securely. Avoid settings or pressure that can crack a brittle surface.
Installation & Care
Disconnect power before changing bits. Seat the shank firmly and start the hole square to the surface.
Let the bit cool and remove debris safely. Inspect the carbide head for damage before drilling another hole.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Unsure which tile bit to choose? Tell Willy the tile material, required hole diameter and drill type.
Important Product Questions
Can I use this on porcelain?
No. Milwaukee specifically does not recommend these glass-and-tile bits for porcelain tile.
Which tool should I use?
This design is intended for a drill/driver when drilling glass or ceramic tile.
Which diameters are supplied?
This is the 5/16 in diameter bit. Choose the diameter required for the anchor or fitting.
