Milwaukee
Milwaukee Tool 5/16" Tile and Natural Stone Bit
- SKU:
- MLW48-20-8993
- Availability:
- Usually Ships Same Day
- Weight:
- 0.05 LBS
Description
DUTY®
Tile & Natural Stone
5/16 in Drill Bit
Drill tile and natural stone with reinforced carbide tips designed for rotary or hammer-drill use.
Product Overview
Eight-grind carbide cuts aggressively. Reinforced tips permit hammer mode on natural stone.
Use on granite, marble and ceramic tile with the appropriate mode. Porcelain is not recommended.
- Carbide cuttingEight-grind head geometry.
- Reinforced tipProtects the cutting head.
- Mode choiceDrill-only or hammer mode.
- Stone drillingFor granite, marble and stone.
Technical Specifications
- Diameter
- 5/16 in
- Head material
- Carbide
- Head grind
- 8-grind
- Drill modes
- Rotary / hammer
- Work surface
- Tile / natural stone
- Shank
- Round
Choose the Correct Fit
Check the exact surface material and required hole diameter. Do not choose this bit for porcelain tile.
Use hammer mode only where suitable for the stone and installation. Brittle finished surfaces require appropriate support and technique.
Installation & Care
Disconnect power before fitting the bit. Clamp or support the work and start square to the surface.
Allow the cutter to cool before handling. Remove debris and inspect the carbide tip for chips before reuse.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help drilling a stone or tile surface? Tell Willy the material, thickness, hole size and tool.
Important Product Questions
Is this suitable for porcelain tile?
No. Milwaukee lists this design for tile and natural stone but does not recommend it for porcelain.
Can it run in hammer mode?
Yes. The reinforced tip is designed for drill-only or hammer-drill operation, with hammer mode used for suitable natural-stone applications.
Which size is this?
This catalog number is the 5/16 in bit. Match that finished diameter to the required anchor or opening.
