Milwaukee
Milwaukee Tool 3/4" HEX Demo 2" Scraping Chisel
- SKU:
- MLW48-62-3025
- Availability:
- Usually Ships Same Day
- Weight:
- 1.88 LBS
Description
DUTY®
Demolition
Scraping Chisel
Use the 2 in wide scraping chisel for scraping surfaces and removing tile.
Product Overview
The 2-inch-wide scraping forged-steel profile is made for scraping surfaces and removing tile.
At 12 inches overall, match the 3/4-inch hex shank to the holder and check tool clearance.
- Tile removalScrapes tile off concrete.
- Forged constructionSteel body for durability.
- Hammer connectionFits the specified holder.
- Working reach12 in overall length.
Technical Specifications
- Working width
- 2 in
- Overall length
- 12 in
- Connection
- 3/4 in hex
- Tip profile
- Scraping
- Body material
- Forged steel
- Application
- Surface scraping / tile removal
Choose the Correct Fit
Choose the scraping profile for scraping surfaces and removing tile. Confirm the removal area before starting.
Confirm the hammer accepts the 3/4 in hex connection and has enough clearance for the complete tool.
Installation & Care
Isolate the hammer before fitting the accessory. Check retention and follow the hammer’s accessory operating instructions.
Check for concealed services and control flying debris and dust. Let the accessory cool, then inspect it for cracks or damage.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help matching a demolition accessory? Send Willy the hammer model, holder type, material and removal task.
Important Product Questions
Which hammer connection does it require?
Use a matching 3/4 in hex holder. A similar-looking shank does not establish compatibility; check the hammer’s accessory instructions.
What work is this profile intended for?
It is intended for scraping surfaces and removing tile. Choose a profile suited to the material and required finish.
How should I check it before reuse?
Inspect the working end, body and connection for damage. Clean it using the tool maker’s method and replace cracked, bent or badly worn accessories.
