Milwaukee

Milwaukee Tool 3/4" HEX Demo 12" Flat Chisel

(No reviews yet) Write a Review
SKU:
MLW48-62-3010
Availability:
Usually Ships Same Day
Weight:
1.46 LBS
*Images are for visual reference only.
  • Milwaukee Tool 3/4" HEX Demo 12" Flat Chisel
  • Milwaukee Tool 3/4" HEX Demo 12" Flat Chisel
  • Milwaukee Tool 3/4" HEX Demo 12" Flat Chisel
  • Milwaukee Tool 3/4" HEX Demo 12" Flat Chisel
  • Milwaukee Tool 3/4" HEX Demo 12" Flat Chisel
  • Milwaukee Tool 3/4" HEX Demo 12" Flat Chisel
$19.97
Frequently bought together:

Description

Built for the TradesReady for What’s Next
Nothing butHEAVY
DUTY®
HAMMER DEMOLITION ACCESSORIES

Demolition
Flat Chisel

Use the 1 in wide flat chisel for chipping and channeling concrete.

MODEL48-62-3010

Product Overview

The 1-inch-wide flat forged-steel profile is made for chipping and channeling concrete.

At 12 inches overall, match the 3/4-inch hex shank to the holder and check tool clearance.

  • Matched profileFlat tip for the task.
  • Forged constructionSteel body for durability.
  • Hammer connectionFits the specified holder.
  • Working reach12 in overall length.

Technical Specifications

Working width
1 in
Overall length
12 in
Connection
3/4 in hex
Tip profile
Flat
Body material
Forged steel
Application
Concrete chipping/channeling

Choose the Correct Fit

Choose the flat profile for chipping and channeling concrete. Confirm the removal area before starting.

Confirm the hammer accepts the 3/4 in hex connection and has enough clearance for the complete tool.

Installation & Care

Isolate the hammer before fitting the accessory. Check retention and follow the hammer’s accessory operating instructions.

Check for concealed services and control flying debris and dust. Let the accessory cool, then inspect it for cracks or damage.

Small Details. Big Jobsite Energy.

Get set. Stay focused. Make your next move count.

BRING ON
THE NEXT JOB.
Willy, GetPipe.com support mascot

Ask Willy:

Need help matching a demolition accessory? Send Willy the hammer model, holder type, material and removal task.

Important Product Questions

Which hammer connection does it require?

Use a matching 3/4 in hex holder. A similar-looking shank does not establish compatibility; check the hammer’s accessory instructions.

What work is this profile intended for?

It is intended for chipping and channeling concrete. Choose a profile suited to the material and required finish.

How should I check it before reuse?

Inspect the working end, body and connection for damage. Clean it using the tool maker’s method and replace cracked, bent or badly worn accessories.

View AllClose

Reviews