Milwaukee
Milwaukee Tool 2PC Long Reach Pliers Set
- SKU:
- MLW48-22-6542
- Availability:
- Usually Ships Same Day
- Weight:
- 1.82 LBS
Description
DUTY®
13" Long Reach
Straight + 45° Set
A 13-inch straight- and 45°-nose pair for retrieving and holding small parts in spaces that limit ordinary handle movement.
Product Overview
Crossed handles open the jaws with a slim approach where surrounding parts limit access.
Match the jaw shape to the part; leave room for handle movement and safe tool removal.
- Deep reachCrossed handle layout.
- Controlled gripSingle-joint leverage.
- Gripping zonesZones for small parts.
- Black oxide finishHelps resist corrosion.
Technical Specifications
- Nominal length
- 13 in
- Nose form
- Straight / 45°
- Joint type
- Single joint
- Handle geometry
- Crossed deep-reach
- Grip
- Slip-resistant
- Finish
- Black oxide
Choose the Correct Fit
Check the access path to the part before choosing a nose shape. Leave enough room to open the jaws and withdraw the tool.
Seat the part within the appropriate gripping zone. Do not rely on a marginal hold at the tip for a heavy or awkward item.
Installation & Care
Keep the handles clear of other parts while closing the jaws. Support loose components so they cannot fall into the assembly.
Wipe grit and moisture from the jaws and pivot after use. Inspect the tips and grips before working in a confined space.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help choosing? Tell Willy your material, required size and working clearance so the GetPipe team can check the fit.
Important Product Questions
Does 13 inches describe the usable reach?
It is the nominal tool length. Actual reach depends on jaw position, handle clearance and the route into the assembly; check those dimensions on your job.
Which nose shape should I choose?
Use the nose shape that lets the jaws meet the part without the handles fouling nearby surfaces. A 45° nose changes the approach angle; a straight nose follows a direct path.
Can I use the long nose as a pry bar?
Use it to grip and position parts. Prying or side-loading the tips can damage them or release the part; choose a tool intended for the applied load.
