Milwaukee
Milwaukee Tool 2pc 1000V Insulated Slim Tip Screwdriver Set
- SKU:
- MLW48-22-2207
- Availability:
- Usually Ships Same Day
- Weight:
- 0.57 LBS
Description
DUTY®
2-Piece Insulated
Slim-Tip Set
Choose among 2 insulated screwdrivers rated to 1,000 V with slim tips for recessed access.
Product Overview
Flush-tip insulation reaches recessed terminals without removing the protective covering.
Magnetic tips retain screws. The tri-lobe handle supports turning where space is limited.
- Rated insulation1,000 V tool rating.
- Slim tip accessFlush protective covering.
- Screw retentionMagnetic driving tips.
- Tri-lobe handleComfortable manual control.
Technical Specifications
- Voltage rating
- 1,000 V
- Tip access
- Flush insulation
- Handle
- Tri-lobe
- Tip retention
- Magnetic
- Identification
- Visible markings
- Test reference
- IEC 60900
Choose the Correct Fit
De-energize and verify the circuit is safe before work. Follow the qualified-person procedure and use the required protective equipment.
Inspect the insulated surface before every use. Remove the tool from service if the covering is cut, cracked, burned or otherwise damaged.
Installation & Care
Select the exact tip and keep the tool clean and dry. Do not modify, grind or repair the insulation with tape.
Store the screwdrivers where sharp tools and heat cannot damage the covering. Inspect again after a drop or other impact.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need to match an insulated driver? Tell Willy the screw profile, size and required reach so the tool fit can be checked.
Important Product Questions
Which screwdrivers are included?
1/4 in cabinet × 4 in and #2 Phillips × 4 in.
Does the 1,000 V rating make live work safe?
No. It is a tool insulation rating, not permission to work energized. Isolate the circuit and follow the applicable electrical safety procedure and protective-equipment requirements.
When should an insulated driver be replaced?
Remove it from service if the insulation is damaged or the tip or handle is compromised. Do not grind the insulation for extra access or tape over damaged areas.
