Milwaukee
Milwaukee Tool 1000V Insulated 8 Inch Diagonal Cutting Pliers
- SKU:
- MLW48-22-2208
- Availability:
- Usually Ships Same Day
- Weight:
- 0.82 LBS
Description
DUTY®
8" Insulated
Diagonal Pliers
A nominal 8-inch diagonal plier with 1000V insulated handles and forged construction, UL classified to the listed insulated hand-tool standards.
Product Overview
Inspect the 8-inch diagonal plier’s 1,000 V handle insulation, including near the guards.
The voltage rating does not replace isolation, training or the job’s electrical-safety procedure.
- Rated insulationHandles are rated at 1000V.
- Forged constructionForged body carries force.
- Hardened edgeTreated edge for repeated cuts.
- Tool standardsIEC 60900 / ASTM F1505.
Technical Specifications
- Nominal length
- 8 in
- Head form
- Diagonal
- Insulation rating
- 1000 V
- Construction
- Forged
- Classification
- UL classified
- Standards
- IEC 60900; ASTM F1505
Choose the Correct Fit
Use the exact tool type and rating required by the electrical work procedure. De-energize and verify absence of voltage wherever possible.
Inspect insulation, handles, guards and cutting surfaces before use. Remove a tool from service if the insulation is cut, cracked or otherwise damaged.
Installation & Care
Use the prescribed personal protection and safe working methods. A rated tool alone does not make an energized task safe.
Clean and store the tool according to its instructions so sharp objects, heat or chemicals do not damage the insulation.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help choosing? Tell Willy your material, required size and working clearance so the GetPipe team can check the fit.
Important Product Questions
Does 1000V insulation authorize live work?
No. Live work requires the applicable qualified-person procedures and protective measures. Prefer isolation and verification; the tool rating is only one part of the safety system.
Can damaged insulation be repaired with tape?
Do not treat tape as restoration of the tool’s certification. Remove damaged tools from service and follow the manufacturer’s inspection and replacement guidance.
Does the nominal length state the cutting capacity?
No. Match material, diameter and hardness to the exact model’s cutting limits. The tool’s overall size and voltage rating do not establish cutting capacity.
