Milwaukee
Milwaukee Tool 10 PC 1000V Insulated Screwdriver Set w/ EVA Foam Case
- SKU:
- MLW48-22-2210
- Availability:
- Usually Ships Same Day
- Weight:
- 5.10 LBS
Description
DUTY®
10-Piece Insulated
Screwdriver Set
Choose among 10 insulated screwdrivers rated to 1,000 V for the specified electrical work procedure.
Product Overview
Two insulation layers show wear, helping identify when the tool needs replacement.
Tip marks aid selection. Flame-retardant, impact-resistant insulation covers handle and shank.
- Rated insulation1,000 V tool rating.
- Wear indicationDual layers reveal damage.
- Tip identificationMarkings aid driver selection.
- Protected exteriorFlame-retardant insulation.
Technical Specifications
- Voltage rating
- 1,000 V
- Insulation
- Dual layer
- Wear indication
- Visual
- Handle protection
- Flame retardant
- Identification
- Visible tip markings
- Test reference
- IEC 60900:2012
Choose the Correct Fit
De-energize and verify the circuit is safe before work. Follow the qualified-person procedure and use the required protective equipment.
Inspect the entire insulated surface before each use. Remove the tool from service if cut, cracked, burned or showing the inner wear layer.
Installation & Care
Select the exact tip and keep the tool clean and dry. Do not modify, grind or repair the insulation with tape.
Store the screwdrivers where sharp tools and heat cannot damage the covering. Inspect again after a drop or other impact.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need to match an insulated driver? Tell Willy the screw profile, size and required reach so the tool fit can be checked.
Important Product Questions
What should I check before choosing the set?
Match the driver profiles, sizes and reach to the terminals you service. The voltage rating does not establish that every included tip fits a particular device.
Does the 1,000 V rating make live work safe?
No. It is a tool insulation rating, not permission to work energized. Isolate the circuit and follow the applicable electrical safety procedure and protective-equipment requirements.
When should an insulated driver be replaced?
Remove it from service if insulation is damaged, the inner wear layer is visible, or the tip or handle is compromised. Do not tape over damage and continue working.
