ASC
AWWA Gate Valve with Hand-Wheel IPS Threaded
- SKU:
- 10NW
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
AWWA Gate Valve with Hand-Wheel IPS Threaded
ASC Figure 10NW AWWA Gate Valve with Hand-Wheel is a resilient wedge gate valve with IPS threaded end connections for dependable isolation service in compatible water-distribution and utility piping systems.
The valve features a ductile iron body and bonnet, 304 stainless steel non-rising stem, hand-wheel operation, resilient wedge, and fusion-bonded epoxy coating. Figure 10NW is rated for 250 PSI non-shock cold working pressure and meets AWWA C515 requirements.
Product Highlights
- ASC Figure 10NW
- 250 PSI non-shock CWP
- IPS threaded ends
- Manual hand-wheel operation
- 304 stainless non-rising stem
- Meets AWWA C515
Technical Specifications
| Product Type | AWWA Resilient Wedge Gate Valve |
|---|---|
| Brand | ASC / SCI |
| Figure | 10NW |
| Body & Bonnet | Ductile Iron ASTM A536 Grade 65-45-12 |
| End Connections | IPS Threaded |
| Pressure Rating | 250 PSI Non-Shock CWP |
| Stem | 304 Stainless Steel, Non-Rising |
| Wedge | Ductile Iron with Buna-N |
| Wedge Nut | Bronze ASTM B584 C83600 |
| Operator | Hand-Wheel |
| Coating | Fusion-Bonded Epoxy |
| Standard | AWWA C515 |
Construction Details
Figure 10NW uses a ductile iron ASTM A536 Grade 65-45-12 body, bonnet, packing gland, hand-wheel, and resilient wedge. The wedge incorporates Buna-N sealing material.
The valve includes a 304 stainless steel non-rising stem, bronze ASTM B584 C83600 wedge nut, Buna-N stem wiper, gasket and O-rings, and 304 stainless steel bonnet and handle hardware.
Wax-encapsulated cap screws and a fusion-bonded epoxy coating provide added protection, while the hand-wheel provides convenient manual valve operation.
Valve Design & Typical Applications
Valve Design
- Resilient wedge gate design
- IPS threaded connections
- Non-rising stainless stem
- Manual hand-wheel operation
- Fusion-bonded epoxy coating
Typical Applications
- Municipal water distribution
- Water utility piping
- IPS threaded piping systems
- Commercial water service
- Industrial water piping
Installation & Selection Considerations
- Confirm the required valve size.
- Verify IPS thread compatibility.
- Confirm 250 PSI suitability.
- Use proper thread sealant.
- Provide hand-wheel clearance.
Use the supplied ASC datasheet to review Figure 10NW materials, 250 PSI rating, IPS threaded connections, hand-wheel configuration, and other technical information when selecting the correct AWWA gate valve.
Need Help Selecting an AWWA Gate Valve with Hand-Wheel IPS Threaded?
Need help confirming valve size, IPS threaded compatibility, hand-wheel configuration, pressure requirements, or suitability for your waterworks application? The GetPipe.com Team can help.
Frequently Asked Questions
What is the ASC figure number for this valve?
This AWWA gate valve with hand-wheel and IPS threaded ends is ASC Figure 10NW.
What end connections does Figure 10NW use?
Figure 10NW uses IPS threaded end connections for compatible threaded piping systems.
What is the pressure rating?
Figure 10NW is rated for 250 PSI non-shock cold working pressure.
What material is the valve body?
The body and bonnet are ductile iron ASTM A536 Grade 65-45-12.
What type of stem does this valve use?
The valve uses a 304 stainless steel non-rising stem.
How is Figure 10NW operated?
Figure 10NW is manually opened and closed using a ductile iron hand-wheel.
Does Figure 10NW meet AWWA standards?
Yes. ASC specifies Figure 10NW as meeting AWWA C515.
What should I confirm before ordering?
Confirm valve size, IPS threaded compatibility, pressure requirements, hand-wheel clearance, and suitability for the intended piping system.
Important Ordering & Installation Notes
- Confirm the required valve size.
- Verify IPS thread compatibility.
- Confirm system pressure requirements.
- Provide hand-wheel clearance.
- Follow applicable AWWA practices.
