ASC
150 lb. Ductile Iron Flanged 45 Elbow
- SKU:
- 38F1
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
150 lb. Ductile Iron Flanged 45 Elbow
ASC / SCI FIG 38F1 150 lb. Ductile Iron Flanged 45 Elbow provides a 45-degree directional change for compatible Class 150 flanged piping systems.
Manufactured from ductile iron conforming to ASTM A536, FIG 38F1 features flanged connections with applicable fitting dimensions conforming to ASME B16.42 and ANSI/AWWA C110/A21.10.
Product Highlights
- ASC / SCI FIG 38F1
- 45° elbow configuration
- Class 150 ductile iron fitting
- Flanged end connections
- UL Listed through 12"
- Galvanizing available upon request
Technical Specifications
| Product Type | Flanged 45° Elbow |
|---|---|
| Brand | ASC / SCI |
| Figure | 38F1 |
| Fitting Class | Class 150 |
| Configuration | 45° Elbow |
| Connection Type | Flanged x Flanged |
| Material | Ductile Iron |
| Material Standard | ASTM A536 |
| Flanged Fitting Standard | ASME B16.42 |
| Waterworks Standard | ANSI/AWWA C110/A21.10 |
| Listing | UL Listed Through 12" |
| Optional Finish | Galvanizing Available Upon Request |
Construction Details
FIG 38F1 is manufactured from ductile iron conforming to ASTM A536 for durable service in compatible Class 150 flanged piping installations.
The 45-degree elbow configuration changes piping direction while maintaining flanged connections at both ends for bolted installation and future service access.
SCI identifies its flanged fitting family as UL Listed through 12 inches. Galvanizing is available upon request when an alternate protective finish is required.
Design & Typical Applications
45° Elbow Design
- 45-degree directional change
- Flanged end connections
- Ductile iron construction
- Serviceable bolted joints
- Class 150 fitting design
Typical Applications
- Water distribution systems
- Industrial piping
- Mechanical piping systems
- Pump and valve piping
- Compatible utility systems
Installation & Selection Considerations
- Confirm the required flange size.
- Verify the 45° configuration.
- Use compatible flange gaskets.
- Align mating flanges properly.
- Confirm system service requirements.
Use the supplied flange specifications and SCI Ductile Iron Flanged Fittings catalog to review flange information, FIG 38F1 product details, material requirements, and selection information.
Need Help Selecting a Ductile Iron Flanged 45° Elbow?
Need help confirming flange size, 45-degree configuration, material requirements, gasket selection, or compatibility with your piping system? The GetPipe.com Team can help.
Frequently Asked Questions
What is the figure number for this 45° elbow?
The ASC / SCI 150 lb. Ductile Iron Flanged 45 Elbow is FIG 38F1.
What is a 45° flanged elbow used for?
It changes the direction of a compatible flanged piping run by 45 degrees.
What connections does FIG 38F1 use?
FIG 38F1 uses flanged connections on both ends for joining compatible flanged piping components.
What material is FIG 38F1 made from?
FIG 38F1 is manufactured from ductile iron conforming to ASTM A536.
What standards apply to this flanged elbow?
Applicable flanged fitting dimensions conform to ASME B16.42 and ANSI/AWWA C110/A21.10.
Is FIG 38F1 UL Listed?
SCI identifies its flanged fitting family as UL Listed through 12 inches.
Can this 45° elbow be galvanized?
Yes. ASC / SCI identifies galvanizing as available upon request.
What should I confirm before ordering?
Confirm flange size, 45-degree configuration, mating flange compatibility, gasket requirements, and intended system service.
Important Ordering & Installation Notes
- Confirm the required flange size.
- Verify the 45° configuration.
- Use compatible flange gaskets.
- Support adjoining piping properly.
- Confirm intended system service.
