Description
Standard Empty Cans – 1-3/4" Neck
Standard Empty Cans – 1-3/4" Neck provide a compatible container option for handling approved joining materials used during plastic piping installation. The standard can configuration incorporates a 1-3/4" neck opening for use with compatible caps, applicators, and accessories.
The 1-3/4" neck configuration should be matched to the intended cap, dauber, brush, pour spout, or other compatible accessory before use. Selection should also account for container size, material compatibility, handling requirements, and the applicable product instructions for the material being transferred or stored.
Product Highlights
- Empty container
- Standard can design
- 1-3/4" neck opening
- Supports compatible accessories
- Designed for material handling
- Suitable for compatible joining products
- Provides a common container configuration
- Can be paired with compatible caps, brushes, daubers, and pouring accessories
Technical Specifications
| Product Type | Standard Empty Can |
|---|---|
| Container Style | Standard Can |
| Container Condition | Empty |
| Neck Size | 1-3/4" |
| Opening Style | Necked Can Opening |
| Accessory Compatibility | Compatible Caps & Applicators |
| Application | Material Handling & Application |
| Typical Use | Compatible Joining Materials |
| Selection Consideration | Neck Size, Container Size & Accessory Configuration |
| Handling Requirement | Follow Material-Specific Instructions |
| Accessory Consideration | Match to 1-3/4" Neck Configuration |
| Primary Function | Provide a Compatible Empty Container for Joining Material Handling |
Standard Can Design
The standard empty can configuration provides a practical container for compatible joining materials and application accessories. Its necked opening allows the can to be paired with appropriately matched caps, daubers, brushes, or other accessories.
The can should be inspected before use and kept clean to help avoid contamination. Always verify that the container is suitable for the specific material being handled.
1-3/4" Neck Configuration
The 1-3/4" neck opening is an important selection detail when matching the can to compatible applicators and closures. Accessories should be chosen specifically for the stated neck configuration to help ensure proper fit.
Confirm the neck size before ordering replacement caps, daubers, brushes, or other accessories. Using the correct mating configuration helps support practical handling and application.
Accessory Compatibility
Standard Empty Cans can be used with compatible application accessories designed for the corresponding neck configuration. Depending on the application, these may include cap brushes, daubers, or other joining-product accessories.
The accessory should be matched not only to the 1-3/4" neck, but also to the material and application procedure being used. Confirm compatibility before transferring material into the container.
Material Handling & Selection
The empty can should be used only with materials for which the container and accessory combination are suitable. Container selection should consider material compatibility, required capacity, application method, and worksite handling requirements.
Follow the applicable product instructions for storage, transfer, application, and cleanup. Do not combine or transfer materials in a way that conflicts with the instructions for the joining product being used.
Installation & Selection Considerations
- Confirm the 1-3/4" neck size.
- Verify accessory compatibility.
- Check material compatibility.
- Keep the container clean.
- Follow applicable handling instructions.
Review the Spears® Super Sourcebook for additional information about Standard Empty Cans, compatible cap and applicator accessories, solvent cement and primer tools, and related Spears® joining products.
Need Help Selecting Standard Empty Cans – 1-3/4" Neck?
Our product specialists can help review your required can size, 1-3/4" neck configuration, compatible cap or applicator, and intended material to help select the appropriate container for your application.
Frequently Asked Questions
What are Standard Empty Cans – 1-3/4" Neck used for?
They provide an empty container option for handling compatible joining materials and related application products.
What is the neck size?
The can is identified with a 1-3/4" neck opening.
Why does the neck size matter?
The neck size should match the cap, dauber, brush, or other compatible accessory being used with the can.
Can these cans be used with joining accessories?
Yes, when the accessory is compatible with the 1-3/4" neck configuration and the intended material.
Should the can be kept clean?
Yes. Keeping the container clean helps reduce the possibility of contaminating the material being handled.
What should I confirm before ordering?
Confirm the required can size, 1-3/4" neck configuration, intended material, and compatible cap or applicator.
Important Ordering & Installation Notes
- Confirm the 1-3/4" neck size.
- Verify accessory compatibility.
- Check material compatibility.
- Keep the can interior clean.
- Follow applicable handling instructions.
