Description
Schedule 80 PVC 90° Elbow (S x FPT)
Schedule 80 PVC 90° Elbow (S x FPT) provides a 90-degree change in direction while transitioning between compatible PVC pipe and a male-threaded component. The socket connection receives appropriately sized compatible PVC pipe, while the FPT connection accepts a compatible male pipe thread.
The S x FPT elbow configuration combines socket and female-threaded connection interfaces within one Schedule 80 PVC fitting. Selection should account for nominal size, Schedule 80 PVC compatibility, adjoining components, required direction change, joining requirements, thread alignment, piping support, and available installation clearance.
Product Highlights
- PVC construction
- Schedule 80 design
- 90° elbow configuration
- Socket x FPT connections
- Provides a right-angle transition
- Combines socket and threaded interfaces
- Connects compatible PVC pipe to a male-threaded component
- Provides a 90° mixed-connection transition within compatible Schedule 80 PVC piping
Technical Specifications
| Product Type | 90° Elbow |
|---|---|
| Material | PVC |
| Schedule | Schedule 80 |
| Connection | Socket x Female Pipe Thread (S x FPT) |
| Connection Count | Two |
| Fitting Configuration | 90° Elbow |
| Socket Interface | Compatible PVC Pipe |
| Threaded Interface | Compatible Male Pipe Thread |
| Connection Style | Socket x Female Threaded |
| Joining Method | Compatible PVC Solvent-Cement Joining x Threaded Connection |
| Direction Change | 90° |
| Primary Function | Provide a 90° Transition Between Compatible PVC Pipe and a Male-Threaded Component |
90° Elbow Design
The 90° elbow configuration redirects the piping route through a right-angle change in direction. This allows compatible PVC pipe and a male-threaded component to be connected where the piping layout requires a 90-degree transition.
The elbow orientation should be established before permanent assembly so both connection interfaces align with the intended piping route. Planning the direction change in advance helps coordinate adjoining components, nearby fittings, piping support, and available working clearance.
Socket & FPT Connections
The socket connection receives appropriately sized compatible PVC pipe, while the FPT connection accepts an appropriately sized compatible male pipe thread. Each connection should be matched to the intended adjoining component before permanent assembly.
The socket surfaces should be prepared for the applicable PVC solvent-cement joining procedure, while the threaded component should be started carefully and kept properly aligned. Compatible joining and thread-sealing materials should be selected for their respective connection types.
Schedule 80 PVC Integration
The Schedule 80 PVC construction allows the elbow to integrate into compatible Schedule 80 PVC piping arrangements requiring a socket-to-threaded directional transition. Matching the nominal size and both connection interfaces to the adjoining components helps maintain the intended piping configuration.
Application suitability should be evaluated using the requirements of the complete piping system rather than the schedule designation alone. Intended service conditions, adjoining materials, connection compatibility, joining materials, installation environment, piping support, and applicable practices should all be considered during fitting selection.
Right-Angle Mixed Connection
A Schedule 80 PVC 90° Elbow with S x FPT connections combines a right-angle direction change with two different connection styles. This arrangement allows compatible PVC pipe to transition directly to a male-threaded component while changing the piping direction by 90 degrees.
Installation planning should consider socket insertion, thread engagement, elbow orientation, adjoining component alignment, nearby fittings, and available clearance. Connected components should align naturally with the elbow so the fitting is not relied upon to correct offsets or support improperly positioned piping.
Installation & Selection Considerations
- Confirm the nominal size.
- Verify the S x FPT arrangement.
- Check Schedule 80 PVC compatibility.
- Match the FPT end to the male thread.
- Confirm the elbow orientation before assembly.
Our PVC fitting specialists can help review your nominal size, Schedule 80 requirements, S x FPT configuration, adjoining PVC pipe, mating male-threaded component, joining requirements, elbow orientation, piping alignment, support requirements, and available installation clearance before you order.
Frequently Asked Questions
What is a Schedule 80 PVC 90° Elbow used for?
It provides a 90-degree change in direction while transitioning between compatible PVC pipe and a male-threaded component.
What does S x FPT mean?
S x FPT identifies a socket connection at one end and a female pipe-threaded connection at the other.
What connects to the socket opening?
The socket opening receives appropriately sized compatible PVC pipe for the applicable solvent-cement joining procedure.
What connects to the FPT opening?
The female pipe-threaded opening accepts an appropriately sized compatible male pipe thread.
Do both ends use the same joining method?
No. The socket connection uses the applicable PVC solvent-cement joining procedure, while the FPT connection uses a threaded mechanical connection.
What should I confirm before ordering?
Confirm the nominal size, S x FPT arrangement, Schedule 80 PVC compatibility, adjoining components, and required 90° orientation.
Important Ordering & Installation Notes
- Inspect both connections before use.
- Confirm the nominal connection size.
- Prepare the socket connection correctly.
- Start the threaded component carefully by hand.
- Set the elbow orientation before final assembly.
