Description
Schedule 80 PVC 2000 EPDM (FPT x MPT)
Schedule 80 PVC 2000 EPDM (FPT x MPT) provides a removable threaded connection using one female pipe-threaded connection and one male pipe-threaded connection. The FPT end accepts a compatible male pipe thread, while the MPT end connects to a compatible female pipe thread.
The FPT x MPT configuration combines female and male threaded interfaces with EPDM sealing material. Selection should account for nominal size, Schedule 80 PVC compatibility, adjoining threaded components, EPDM compatibility, thread alignment, sealing requirements, piping support, and available service clearance.
Product Highlights
- PVC construction
- EPDM sealing material
- Schedule 80 design
- 2000 configuration
- FPT x MPT connections
- Provides a removable threaded connection
- Combines female and male threaded interfaces
- Connects compatible male- and female-threaded components
Technical Specifications
| Product Type | Union |
|---|---|
| Material | PVC |
| Schedule | Schedule 80 |
| Connection | Female Pipe Thread x Male Pipe Thread (FPT x MPT) |
| Connection Count | Two |
| Fitting Configuration | 2000 |
| Female Thread Interface | Compatible Male Pipe Thread |
| Male Thread Interface | Compatible Female Pipe Thread |
| Sealing Material | EPDM |
| Connection Style | Female Threaded x Male Threaded |
| Joining Method | Threaded Mechanical Connection |
| Primary Function | Provide a Removable Connection Between Compatible Threaded Components |
Union Design
The union configuration provides a connection point that can be separated when access to adjoining piping or equipment is required. This can simplify servicing or piping changes because connected components can be separated at the union without cutting adjoining piping.
The union should be positioned where there is adequate room for assembly, disassembly, and future access. Adjoining components should be aligned and supported so the union is not relied upon to correct offsets or carry unnecessary mechanical loads.
FPT & MPT Connections
The FPT connection accepts an appropriately sized compatible male pipe thread, while the MPT connection mates with an appropriately sized compatible female pipe thread. This arrangement provides female and male threaded interfaces within the same removable connection.
Threaded components should be started carefully and kept properly aligned during assembly. Compatible thread-sealing materials and controlled installation help establish the connections while reducing unnecessary mechanical stress on the fitting.
Schedule 80 PVC Integration
The Schedule 80 PVC construction allows the fitting to integrate into compatible Schedule 80 PVC piping arrangements requiring male-to-female threaded interfaces. Matching the nominal size and thread types to the adjoining components helps maintain the intended piping configuration.
Application suitability should be evaluated using the requirements of the complete piping system rather than the schedule designation alone. Intended service conditions, adjoining materials, thread compatibility, sealing materials, piping support, and applicable practices should all be considered during fitting selection.
EPDM Sealing Configuration
The EPDM sealing material is part of the union sealing configuration and should be evaluated for compatibility with the intended service. Seal-material selection can depend on the conveyed media, temperature, operating conditions, and other application requirements.
The sealing surfaces and EPDM seal should be inspected before assembly and kept free from damage or contamination. The union should be assembled evenly so the sealing components remain correctly positioned during installation and future servicing.
Installation & Selection Considerations
- Confirm the nominal size.
- Verify the FPT x MPT arrangement.
- Check Schedule 80 PVC compatibility.
- Confirm EPDM suitability for the application.
- Allow adequate clearance for union servicing.
Our PVC fitting specialists can help review your nominal size, Schedule 80 requirements, FPT x MPT configuration, EPDM sealing material, adjoining threaded components, thread compatibility, piping alignment, support requirements, and available service clearance before you order.
Frequently Asked Questions
What is a Schedule 80 PVC 2000 EPDM FPT x MPT fitting used for?
It provides a removable connection between compatible threaded components using female and male pipe-threaded interfaces.
What does FPT x MPT mean?
It identifies a female pipe-threaded connection at one end and a male pipe-threaded connection at the other.
What connects to the FPT end?
The FPT end accepts an appropriately sized compatible male pipe thread.
What connects to the MPT end?
The MPT end connects to an appropriately sized compatible female pipe thread.
What does EPDM identify?
EPDM identifies the specified sealing material and should be checked for compatibility with the intended application.
What should I confirm before ordering?
Confirm the nominal size, FPT x MPT arrangement, Schedule 80 PVC compatibility, EPDM sealing requirements, and adjoining threaded components.
Important Ordering & Installation Notes
- Inspect both threads before use.
- Confirm the nominal connection size.
- Verify EPDM compatibility for the application.
- Start threaded connections carefully by hand.
- Allow clearance for future union servicing.
