Milwaukee

Milwaukee Tool 7-AMP CORDED 1/2" RIGHT-ANGLE DRILL KIT HARD CASE Features and Benefits: Powerful 7-amp motor: Delivers trigger speed control in two ranges - 0-335/0-750 RPM - plus reverseTorque:...

Milwaukee Tool PULLEY SUPPORT USE 6230 DEEP CUT TSC BSAW Features & Benefits:Use w/ 6230 Deep Cut TSC Band SawAccessory type: Pulley SupportThis item works with Band Saws and Saws

Milwaukee Tool M18 Cordless LITHIUM-ION 4-Tool Combo Kit Features and Benefits: N/A

Milwaukee Tool M18 1/4" HEX IMP DRIVER 1 BATT XC KIT Features & Benefits: 4-pole frameless motor for longer life, more power and run time Powerful impact mechanism delivers fast application...

Milwaukee Tool M12 FUEL 2-Tool Combo Kit: 1/2" Drill Driver and 1/4" Hex Impact Driver Features and Benefits: (1) 2503-20 M12 FUEL 1/2" Drill(1) 2553-20 M12 FUEL 1/4" Hex Impact Driver(1) 48-11-2440...

Milwaukee Tool M12 FUEL 1/2" Hammer Drill Kit Features and Benefits: Most Capable 12V Hammer Drill with the power to perform a wide range of applicationsLightest Weight in its class for tool belt...

Milwaukee Tool M12 FUEL 1/2" Hammer Drill (Tool Only) Features and Benefits: Most Capable 12V Hammer Drill with the power to perform a wide range of applicationsLightest Weight in its class for tool...

Milwaukee Tool SWITCH FOR BFILE SANDER-GRINDER Features & Benefits: This is a genuine manufacturer-approved replacement switch used on a variety of power equipment. It is the part of the...

Milwaukee Tool TRIGGER SWITCH FOR HAMMER DRILLS, 5378-20 Features & Benefits:Internal terminalsLocking mechanism for the triggerForward, reverse leverAuthentic Milwaukee replacement part; sold...

Milwaukee Tool BRUSH SPRING Features & Benefits:This is an OEM authorized replacement part designed for use with Milwaukee power toolsThis part is used to keep the brush tight against the...

Milwaukee Tool BRUSH RETAINING SCREW CAP Features & Benefits:This is a genuine Milwaukee replacement part, it is sold individuallyThe purpose of this part is to secure the brushes in the brush...

Milwaukee Tool 9 FT. CORD SET, 14 GAUGE, 3-WIRE Features & Benefits:3 Prongs3 Wire14 Gauge9 Feet LongConstructed with tough, thick outer rubber insulation for a long service life

Milwaukee Tool CORD FOR 6148-6 This cord is a genuine Milwaukee replacement part and is sold individually. It is constructed with tough, thich outer rubber insulation and a cord protector for a long...

Milwaukee Tool 22-64-0215 CORD SET Features & Benefits:2 Prongs2 WiresLength: 8'Gauge: 18Wires: 2Type: Bare WireGenuine OEM sourced replacement part designed for use with...

Milwaukee Tool 18V CONNECTOR BLOCK Features & Benefits:18-Volt Milwaukee Connector BlockThis item works with Lighting, Worklight and Flashlights

Milwaukee Tool BRUSH HOLDER ASSEMBLY Features and Benefits:

Milwaukee Tool BRUSH HOLDER Features & Benefits: Remove screws holding the cover togetherCarefully remove two halves of the housing to gain access to armature and brush holderRemove the screws...

Milwaukee Tool GENERIC CARBON BRUSH SET FOR 6148-6 Features & Benefits:Carbon Brush SetFits most Mliwaukee toolsThis part replaces 22-20-0920 and 22-20-0555Made of Japanese Toyo Taneo...

Milwaukee Tool RIGHT BRUSH HOLDER Features & Benefits:Disassemble the grinder and removed broken partsAssemble new brushes in the holders with the new springsInstall brush and holder assembly in...

Milwaukee Tool LEFT BRUSH HOLDER, USE 16 GA NIBBLER, GRINDER SANDER Features & Benefits:Fits various Milwaukee Grinders, Sander-Grinders, Jig Saws, Bandfiles, Orbit SandersMilwaukee® Left Brush...

Milwaukee Tool CARBON BRUSH SPRING ASSEMBLY Features & Benefits:Includes 1 Carbon Brush with wire lead and brush spring attachedWorn brushes are often the cause of a poorly running motor...

Milwaukee Tool CARBON BRUSH ASSEMBLY Features & Benefits:This is a genuine Milwaukee replacement part, it is sold individuallyWorn brushes frequently are the cause behind a motor running...

Milwaukee Tool ANVIL ASSEMBLY Benefits & Features:Connect different Impact Sockets to unit.Includes part numbers 44-60-1170 and 40-50-8320This item works with an Impact Wrench

Milwaukee Tool BRUSH CARD ASSEMBLY (CARBON BRUSH KIT) FOR 2651-22 Features and Benefits:Genuine Milwaukee replacement part, sold individuallyTo replace this part you will need to release the spring...

Milwaukee Tool SCREWS Features & Benefits:It is a standard hardware which has multiple uses based on a tool.This part replaces obsolete part #: 06-95-0216, 06-S2-7270 and 06-95-3240.

Milwaukee Tool #8 - 32X3/8" TAPTITE PAN HEAD SLOTTED TORX SCREW Features & Benefits:This part replaces obsolete part #: 06-95-0209, 06-95-0208, 06-95-0211, 06-95-0210, 06-82-5520, 06-81-5502,...

Milwaukee Tool 5/16-18X13/16 MACH TORX SCREW Features & Benefits:Size:  5/16-18x13/16Mach Torx ScrewMFG: Milwaukee ToolMFG Part Number: 06-82-5394This is an OEM part

Milwaukee Tool SOC HEAD SCREW, LH THREAD Features & Benefits:Socket Head Screw, LH ThreadThe purpose of the 06-75-3150 Screw is to secure the chuck to the spindleThis is a left hand threaded...

Milwaukee Tool SET SCREW This is a genuine Milwaukee replacement part, it is sold individually.<br style="box-sizing:inherit;" />The most common use of the 06-75-2402 Screw is to hold the...

Milwaukee Tool CENTER PIN This part is compatible with many tools including:Milwaukee49-57-0013 Arbor #3 Mt To Qc Steel Hawg W/ Chip Breaker AccessoriesMilwaukee49-57-0032 Arbor 3/4" Shank For Quick...

Milwaukee Tool K50X35MM PAN HEAD SLOTTED TORX SCREW Features and Benefits:This is a genuine OEM sourced replacement screw, not an aftermarket imitationIt is a high quality hardware utilized on...

Milwaukee Tool CAM FOLLOWER BLADE GUIDE Features & Benefits:It helps track the blade on the blade pulleyThere are 6 of these used on the bandsawIt is advisable to replace all 6 at a time, if one...

Milwaukee Tool BALL BEARING FOR GRINDERS 2 SEAL Features & Benefits:The ideal assistant in workDeliver new-to-world technology and unparalleled levels of performanceDeveloped with innovative...

Milwaukee Tool BALL BEARING 8X19X6 / MLW0370-20 Features & Benefits:This is an authentic Milwaukee replacement part, sourced from the original manufacturer for use with close quarter angle...

Milwaukee Tool STEEL BALL SET OF 6 Features & Benefits:Milwaukee 02-02-2045 - STEEL BALL (SET OF 6)This Part Is Used in Model (Cat) Number: 49-57-XXXX

Milwaukee Tool 9/64" DIAMETER STEEL BALL Features & Benefits:9/64" DIAMETER STEEL BALLThis item works with a drillThis item works with a electric drillThis item works with a screwdriver

Milwaukee Tool Vac Hose Features and Benefits: Vac HoseVac Hose

Milwaukee Tool Brush Holder Cap

Milwaukee Tool Shelf Mounting Brackets for M18 and M12 Gangbox Rapid Charger Features and Benefits: Compatible with Milwaukee® M18™ and M12™ Gangbox Rapid Charger.For use when desired...

Milwaukee Tool M18 Boom Light Storage Boot