Milwaukee
Milwaukee Tool SPL/RDHEX Demo 1" x 18" Flat Chisel
- SKU:
- MLW48-62-2030
- Availability:
- Usually Ships Same Day
- Weight:
- 2.50 LBS
Description
DUTY®
Demolition
Flat Chisel
Use the 1 in wide flat chisel for general demolition.
Product Overview
The 1 in wide forged flat tip serves general demolition; the overall chisel length is 18 in.
Match the 3/4 in hex / 21/32 in round shank to the holder and check hammer clearance.
- Matched profileFlat working profile.
- Forged steelDurable steel body.
- Hammer fitMatch hex/round holder.
- Overall length18 in total length.
Technical Specifications
- Working width
- 1 in
- Overall length
- 18 in
- Connection
- 3/4 in hex / 21/32 in round
- Tip profile
- Flat
- Body material
- Forged steel
- Application
- General demolition
Choose the Correct Fit
Choose the flat profile for general demolition. Confirm the removal area before starting.
Confirm the hammer accepts the 3/4 in hex / 21/32 in round connection and has enough clearance for the complete tool.
Installation & Care
Isolate the hammer before fitting the accessory. Check retention and follow the hammer’s accessory operating instructions.
Check for concealed services and control flying debris and dust. Let the accessory cool, then inspect it for cracks or damage.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help matching a demolition accessory? Send Willy the hammer model, holder type, material and removal task.
Important Product Questions
Which hammer connection does it require?
Use a matching 3/4 in hex / 21/32 in round holder. A similar-looking shank does not establish compatibility; check the hammer’s accessory instructions.
What work is this profile intended for?
It is intended for general demolition. Choose a profile suited to the material and required finish.
How should I check it before reuse?
Inspect the working end, body and connection for damage. Clean it using the tool maker’s method and replace cracked, bent or badly worn accessories.
