Milwaukee
Milwaukee Tool SHOCKWAVE Lineman's Impact 1/2" Drive 3/8" Hex Bit Socket
- SKU:
- MLW49-66-5142
- Availability:
- Usually Ships Same Day
- Weight:
- 0.22 LBS
Description
DUTY®
3/8 in Hex Bit
1/2 in Drive Socket
A 3/8 in hex bit socket with a 1/2-inch square drive, one-piece construction and 1-3/4-inch hex fastening depth.
Product Overview
The 3/8 in hex profile engages matching recessed hardware through a 1/2-inch square-drive setup.
Its 1-3/4-inch fastening depth reaches connections within a compact body for confined access.
- One-piece designBuilt for power-tool torque.
- Compact profileConfined-connection access.
- Pin-detent retentionSecures the drive connection.
- Tool flexibilityFor hand-tool or power-tool use.
Technical Specifications
- Square drive
- 1/2 in
- Hex bit size
- 3/8 in
- Fastening depth
- 1-3/4 in
- Construction
- One-piece
- Retention
- Pin detent
- Tool compatibility
- Hand and power tools
Choose the Correct Fit
Match the 3/8 in hex bit to the connector or bolt recess. Clear dirt from the recess so the bit can engage fully.
Use a compatible 1/2-inch square-drive tool or adapter. Verify that the retention feature is properly engaged.
Installation & Care
Check the available space around the connector as well as the fastening depth. Keep the bit aligned with the recess during use.
Inspect the hex corners and square drive for wear or cracks. Follow the connector maker’s installation procedure and replace damaged accessories.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help matching a hex bit socket? Tell Willy the connector or bolt size, drive size and access space so the GetPipe team can check your selection.
Important Product Questions
What does the fastening depth mean?
The listed hex fastening depth is 1-3/4 inches. Check it against the depth of the connection and the space around the socket body.
Can I use it with a hand ratchet?
Yes. This hex bit socket is listed for both hand and power tools with a compatible 1/2-inch square-drive connection.
Can I use a nearby hex size?
Use the size specified for the fastener or connector. A loose fit can damage the recess, even when two nominal sizes are close.
