Milwaukee
Milwaukee Tool SHOCKWAVE Impact Security Insert Bit Set - 9PC
- SKU:
- MLW48-32-4620
- Availability:
- Usually Ships Same Day
- Weight:
- 0.10 LBS
Description
DUTY®
Security / specialty
Driver Bit Set
Keep a selection of security and specialty profiles ready for matching service fasteners.
Product Overview
The security and specialty selection suits service work where ordinary Phillips or slotted tips do not fit.
Compare the actual recess with the included tip list before opening a fitting or starting a repair.
- Torque absorptionSHOCK ZONE absorbs torque.
- Tip wear controlWear Guard resists tip wear.
- Clear identificationLaser-marked bit sizes.
- Heat treatmentCustom; for repeated use.
Technical Specifications
- Bit format
- Insert
- Hardness control
- Custom heat-treated
- Torque relief
- Shockzone
- Tip protection
- Wear Guard
- Size marking
- Laser-etched
- Tool use
- Impact / drill driver
Choose the Correct Fit
Identify the exact recess profile and size before choosing a tip. Clean debris from the recess to permit full seating.
Use a compatible holder that retains the bit securely. Do not force a security or specialty tip into a recess that only partly matches.
Installation & Care
Begin slowly with the tool aligned. Stop if the tip slips, then check fit and screw condition.
Inspect each working end after use and replace damaged bits. Keep the different profiles in identified storage positions.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help checking the fit? Tell Willy your tool, accessory and working dimensions so the GetPipe team can help.
Important Product Questions
Which working tips are included?
Security Torx T20, T25 (two) and T30; hex 1/8 and 5/32 inch; spanner #10; and Clutch G 3/16 and 5/32 inch. The exact manufacturer list does not label the two hex tips as security hex.
Does this cover every security screw?
No. Security and specialty recesses vary by shape and size. Confirm the actual tip requirement rather than choosing only by a set label.
Can the bit determine the tightening torque?
No. Follow the fastener or assembly’s torque requirement; an impact-duty bit does not limit the load applied.
