Milwaukee
Milwaukee Tool SDS Plus to 1/2" Chuck Adapter
- SKU:
- MLW48-03-3005
- Availability:
- Usually Ships Same Day
- Weight:
- 1.00 LBS
Description
DUTY®
SDS-Plus
Chuck Adapter
Fit the specified 1/2 in chuck assembly to a compatible SDS-Plus hammer using this threaded adapter.
Product Overview
An SDS-Plus tool end connects to a 1/2–20 threaded chuck mount; match both interfaces.
The chuck, retaining screw and key are separate accessories. Confirm the complete assembly.
- SDS-Plus shankConnects to the rotary hammer.
- Threaded mountAccepts the matching chuck.
- Serviceable setupUses specified chuck parts.
- Separate hardwareChuck parts ordered separately.
Technical Specifications
- Tool connection
- SDS-Plus
- Chuck mount
- 1/2–20 thread
- Matching chuck
- 48-66-1360
- Retaining screw
- 06-75-3150
- Chuck key
- 48-66-3280
- Chuck capacity
- 1/2 in
Choose the Correct Fit
Check the rotary hammer manual permits this chuck assembly and the proposed drilling application.
Use the specified chuck, retaining screw and key. Do not assume that thread size alone proves a complete safe assembly.
Installation & Care
Isolate the hammer before fitting the adapter. Assemble and retain the chuck according to its instructions.
Check the approved mode before operation. A three-jaw chuck assembly must not be assumed suitable for hammer action.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help matching a chuck adapter? Send Willy the hammer model, chuck part number and intended drilling task.
Important Product Questions
Which way does this adapter work?
The SDS-Plus end fits the tool; the threaded end carries the specified 1/2 in chuck. Verify that arrangement against the hammer and chuck instructions.
Are the chuck and mounting pieces included?
No. Chuck 48-66-1360, screw 06-75-3150 and key 48-66-3280 are listed separately. Confirm all required components for the assembly.
Can I use hammer mode with the attached chuck?
Do not assume hammer-mode suitability. Follow the hammer and chuck instructions and use only the permitted operating mode.
