Milwaukee
Milwaukee Tool SDS Plus SLEDGE Floor Scraper Replacement Kit
- SKU:
- MLW48-62-1914
- Availability:
- Usually Ships Same Day
- Weight:
- 0.41 LBS
Description
DUTY®
SDS-Plus Scraper
Blade & Hardware
Renew the matched floor-scraper assembly with a 5 in blade and its specified mounting hardware.
Product Overview
For scraper 48-62-6046, this kit renews a 5 in blade. Match the exact mounting arrangement.
The flexible blade reaches beneath flooring. Countersunk bolts, locknuts and washers retain it.
- Flexible bladeWorks beneath floor covering.
- Matched hardwareRenews the blade attachment.
- Specific scraper fitListed for 48-62-6046.
- Version checkMatch blade and bolt style.
Technical Specifications
- Blade width
- 5 in
- Scraper fit
- 48-62-6046
- Blade style
- Flexible
- Bolt style
- Countersunk
- Retention hardware
- Locknuts / split washers
- Operating mode
- Hammer only
Choose the Correct Fit
Identify scraper 48-62-6046 and compare the existing blade width, mounting plate and fastener design before ordering.
This kit uses a 5 in blade and countersunk bolts. Do not substitute hardware based only on the hammer connection.
Installation & Care
Isolate the hammer and let the scraper cool before disassembly. Follow the specified mounting and tightening sequence.
Inspect the assembled blade and hardware before resuming work. Recheck retention during use as the instructions require.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help identifying scraper parts? Send Willy the scraper part number and a photo of its blade mounting hardware.
Important Product Questions
What replacement components are supplied?
The kit includes a 5 in blade, three countersunk bolts, three locknuts and three split lock washers. It renews the blade assembly; confirm any separate shank or body requirements.
Will it fit every scraper with the same SDS connection?
No. The listing identifies a specific scraper and blade configuration. Compare the exact version and fastener arrangement before fitting replacement parts.
Can I reuse damaged bolts or a bent hold-down plate?
Replace damaged mounting components with the specified parts. Do not continue using an assembly that cannot retain the blade securely.
