Milwaukee
Milwaukee Tool SDS PLUS SLEDGE 10" Bull Point Chisel
- SKU:
- MLW48-62-6050
- Availability:
- Usually Ships Same Day
- Weight:
- 0.52 LBS
Description
DUTY®
SLEDGE
Bull Point Chisel
Use the 10 in long bull point chisel for chipping and breaking concrete.
Product Overview
The 10-inch forged-steel bull point chips and breaks concrete with reinforced working edges.
At 10 inches overall, match the SDS-Plus shank to the holder and check tool clearance.
- Reinforced edgesHelp the tip stay sharp.
- Forged constructionSteel body for durability.
- Task-shaped tipBull point profile for removal.
- Low maintenanceNo re-hardening required.
Technical Specifications
- Overall length
- 10 in
- Connection
- SDS-Plus
- Tip profile
- Bull point
- Body material
- Forged steel
- Edge design
- Reinforced
- Maintenance
- No re-hardening
Choose the Correct Fit
Choose the bull point profile for chipping and breaking concrete. Confirm the removal area before starting.
Confirm the hammer accepts the SDS-Plus connection and has enough clearance for the complete tool.
Installation & Care
Isolate the hammer before fitting the accessory. Check retention and select hammer-only mode before starting.
Check for concealed services and control flying debris and dust. Let the accessory cool, then inspect it for cracks or damage.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help matching a demolition accessory? Send Willy the hammer model, holder type, material and removal task.
Important Product Questions
Which hammer connection does it require?
Use a matching SDS-Plus holder. A similar-looking shank does not establish compatibility; check the hammer’s accessory instructions.
What work is this profile intended for?
It is intended for chipping and breaking concrete. Choose a profile suited to the material and required finish.
Does it need re-sharpening or re-hardening?
Milwaukee states that this SLEDGE design does not need re-sharpening or re-hardening. Replace a damaged tool and follow the inspection instructions.
