Milwaukee
Milwaukee Tool SDS-MAX SLEDGE 1" X 16" Flat Chisel
- SKU:
- MLW48-62-4252
- Availability:
- Usually Ships Same Day
- Weight:
- 1.56 LBS
Description
DUTY®
SLEDGE
Flat Chisel
Use the 1 in wide flat chisel for chipping and breaking concrete.
Product Overview
The 1 in wide flat tip chips and breaks concrete; the chisel’s overall length is 16 in.
Match the SDS-Max shank to the holder; reinforced edges need no re-hardening after use.
- Reinforced edgesHelp keep tips sharp.
- Forged steelDurable steel body.
- Task-shaped tipFlat removal profile.
- Low maintenanceNo re-hardening required.
Technical Specifications
- Working width
- 1 in
- Overall length
- 16 in
- Connection
- SDS-Max
- Tip profile
- Flat
- Body material
- Forged steel
- Edge design
- Reinforced
Choose the Correct Fit
Choose the flat profile for chipping and breaking concrete. Confirm the removal area before starting.
Confirm the hammer accepts the SDS-Max connection and has enough clearance for the complete tool.
Installation & Care
Isolate the hammer before fitting the accessory. Check retention and select hammer-only mode before starting.
Check for concealed services and control flying debris and dust. Let the accessory cool, then inspect it for cracks or damage.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help matching a demolition accessory? Send Willy the hammer model, holder type, material and removal task.
Important Product Questions
Which hammer connection does it require?
Use a matching SDS-Max holder. A similar-looking shank does not establish compatibility; check the hammer’s accessory instructions.
What work is this profile intended for?
It is intended for chipping and breaking concrete. Choose a profile suited to the material and required finish.
Does it need re-sharpening or re-hardening?
Milwaukee states that this SLEDGE design does not need re-sharpening or re-hardening. Replace a damaged tool and follow the inspection instructions.
