Milwaukee
Milwaukee Tool SDS MAX Bull Point Chisel 24"
- SKU:
- MLW48-62-4062
- Availability:
- Usually Ships Same Day
- Weight:
- 2.45 LBS
Description
DUTY®
SDS-Max
Bull Point Chisel
Use the 24 in long bull point chisel for chipping and breaking concrete.
Product Overview
This forged bull-point chisel has a 24 in overall length for chipping and breaking concrete.
Match the SDS-Max shank to the holder; this accessory uses the hammer-only operating mode.
- Matched profileBull-point working tip.
- Forged steelDurable steel body.
- Hammer connectionSDS-Max holder fit.
- Overall length24 in total length.
Technical Specifications
- Overall length
- 24 in
- Connection
- SDS-Max
- Tip profile
- Bull point
- Body material
- Forged steel
- Operating mode
- Hammer only
- Work material
- Concrete
Choose the Correct Fit
Choose the bull point profile for chipping and breaking concrete. Confirm the removal area before starting.
Confirm the hammer accepts the SDS-Max connection and has enough clearance for the complete tool.
Installation & Care
Isolate the hammer before fitting the accessory. Check retention and select hammer-only mode before starting.
Check for concealed services and control flying debris and dust. Let the accessory cool, then inspect it for cracks or damage.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help matching a demolition accessory? Send Willy the hammer model, holder type, material and removal task.
Important Product Questions
Which hammer connection does it require?
Use a matching SDS-Max holder. A similar-looking shank does not establish compatibility; check the hammer’s accessory instructions.
What work is this profile intended for?
It is intended for chipping and breaking concrete. Choose a profile suited to the material and required finish.
How should I check it before reuse?
Inspect the working end, body and connection for damage. Clean it using the tool maker’s method and replace cracked, bent or badly worn accessories.
