Milwaukee
Milwaukee Tool SDS MAX Brick Channel Chisel 1-1/4" x 12"
- SKU:
- MLW48-62-4097
- Availability:
- Usually Ships Same Day
- Weight:
- 1.38 LBS
Description
DUTY®
SDS-Max
Winged Chisel
Use the 1-1/4 in wide winged channel tool for conduit channels in block.
Product Overview
The 1-1/4 in profile opens a conduit recess in block. Its wings help control the channel depth.
The forged-steel body uses an SDS-Max shank. Operate in hammer-only mode with a matching tool.
- Depth-control wingsHelp guide the channel depth.
- Forged constructionSteel body for durability.
- Hammer connectionFits the listed SDS-Max holder.
- Working reachCheck access before fitting.
Technical Specifications
- Working width
- 1-1/4 in
- Connection
- SDS-Max
- Tip profile
- Winged channel
- Body material
- Forged steel
- Depth guide
- Wings
- Operating mode
- Hammer only
Choose the Correct Fit
Confirm the conduit channel is permitted and clear of structural reinforcement or concealed services.
Confirm the hammer accepts the SDS-Max connection and has enough clearance for the complete tool.
Installation & Care
Isolate the hammer before fitting the accessory. Check retention and select hammer-only mode before starting.
Check for concealed services and control flying debris and dust. Let the accessory cool, then inspect it for cracks or damage.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help matching a demolition accessory? Send Willy the hammer model, holder type, material and removal task.
Important Product Questions
Which hammer connection does it require?
Use a matching SDS-Max holder. A similar-looking shank does not establish compatibility; check the hammer’s accessory instructions.
What work is this profile intended for?
It is intended for conduit channels in block.
How should I check it before reuse?
Inspect the working end, body and connection for damage. Clean it using the tool maker’s method and replace cracked, bent or badly worn accessories.
