Milwaukee
Milwaukee Tool SDS-Max 5/8" x 10" Ground Rod Driver
- SKU:
- MLW48-62-4093
- Availability:
- Usually Ships Same Day
- Weight:
- 1.75 LBS
Description
DUTY®
SDS-Max
Ground Rod Driver
Drive 1/2 and 5/8 in ground rods with a matching hammer and this dedicated ground-rod attachment.
Product Overview
The socket accepts the listed rod diameters for grounding work. The driver is 10 in overall.
The SDS-Max shank transfers hammer blows; match rod fit and tool capacity.
- Rod socketFits the stated rod diameters.
- Forged steelBuilt for driving durability.
- Powered drivingReduces manual hammering.
- Matched connectionUses the listed hammer holder.
Technical Specifications
- Rod diameters
- 1/2 and 5/8 in
- Connection
- SDS-Max
- Body material
- Forged steel
- Overall length
- 10 in
- Operating mode
- Hammer only
- Rod service
- Temporary / permanent
Choose the Correct Fit
Locate buried services and confirm the approved grounding position before driving any rod.
Check the 1/2 and 5/8 in rod size against the socket. Confirm the tool’s driving capacity and local installation requirements.
Installation & Care
Isolate the hammer before fitting the attachment. Use hammer-only mode.
Keep the driver aligned with the rod. Stop if the rod bends or an obstruction is encountered, then inspect the setup.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help matching a ground-rod driver? Send Willy the rod diameter, hammer model and holder type.
Important Product Questions
Will it accept any size of ground rod?
No. It is listed for 1/2 and 5/8 in rods. Check the rod end and socket fit before starting.
Does this attachment replace a drilling bit?
No. It transfers hammer action into a ground rod. It is not intended to drill a hole or cut through an obstruction.
What if the rod hits a buried obstruction?
Stop and reassess the location and approved installation method. Do not use extra force to drive blindly through a possible service or obstruction.
