Milwaukee
Milwaukee Tool Placement Guide
- SKU:
- MLW48-08-0275
- Availability:
- Usually Ships Same Day
- Weight:
- 0.51 LBS
Description
DUTY®
Cable Bit
Placement Guide
A hand guide for positioning 3/8–3/4 in cable bits inside walls during small-wire installation.
Product Overview
Use the guide to position a cable bit inside the wall before drilling. The grip helps hand control.
Formed hook ends engage the bit for placement. An elongated loop handle provides a firm handhold.
- Cable bit sizingFor 3/8–3/4 in diameters.
- Hole placementPositions bits inside walls.
- Hand controlNo-slip handle grip.
- Guide geometryFormed hook ends at the tip.
Technical Specifications
- Bit family
- Milwaukee cable bits
- Bit diameter
- 3/8–3/4 in
- Work location
- Wall interiors
- Grip
- No-slip
- Guide tip
- Formed hooks
- Handle shape
- Elongated loop
Choose the Correct Fit
Match the guide to a cable bit between 3/8 and 3/4 in diameter. It is a positioning aid for wall-cavity work, so also choose the bit length and drill for the route.
Check the wall for concealed wiring, pipework and other hazards before drilling. Isolate affected services and choose a safe entry point for the guide and bit.
Installation & Care
Position the bit with the formed guide end before starting the drill. Keep hands out of the rotating bit’s path and follow the included placement instructions.
Use controlled drilling pressure and stop to reposition if the bit shifts. Inspect the hooks and grip after use and replace a bent or damaged guide.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Tell Willy the cable-bit diameter, length and wall access to check the placement guide.
Important Product Questions
Will it work with every long drill bit?
It is specified for Milwaukee cable bits from 3/8 to 3/4 in diameter. Check other bit types separately.
Can it tell me whether the drilling path is clear?
No. Inspect the wall and locate concealed services before drilling. The guide helps position the bit; it does not detect wiring or pipes.
When should I position the guide?
Set the bit’s location before starting the drill, keep hands clear of the rotating path and follow the included instructions.
