Milwaukee
Milwaukee Tool MX FUEL Handheld Core Drill Kit w/ Stand
- SKU:
- MLWMXF301-2CXS
- Availability:
- Usually Ships Same Day
- Weight:
- 151.00 LBS
Description
DUTY®
MX FUEL Core Drill
& Stand Kit
A handheld core-drill kit with a compact stand, for up to 6 in holes in reinforced concrete.
Product Overview
The brushless drill supports wet or dry coring. A clutch and AUTOSTOP help control bind-up.
An LED level and pressure gauge guide the cut; ONE-KEY supports tracking and management.
- Core capacityUp to 6 in reinforced concrete.
- Two speeds790 / 1,550 RPM.
- Wet or dry coringUse the approved setup.
- Stand includedCompact core-drill stand.
Technical Specifications
- Battery platform
- MX FUEL
- Motor
- Brushless
- Maximum core
- 6 in
- Spindle
- 1-1/4 in–7
- Low / high speed
- 790 / 1,550 RPM
- Coring method
- Wet / dry
Choose the Correct Fit
Check the material, bit size and permitted handheld or stand-mounted configuration in the drill manual. Locate embedded services before coring.
Secure the stand or prepare the handheld grip exactly as instructed. Install an approved bit and use the correct spindle adapter where required.
Installation & Care
Choose the specified speed and wet or dry method for the bit and material. Use the LED level and pressure gauge while controlling feed pressure.
Remove the battery before setup changes or service. Clean and inspect the spindle, stand and water connections and follow dust-control requirements.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Tell Willy the hole diameter, material and handheld or stand-mounted plan to check the core-drill setup.
Important Product Questions
What is the maximum stated hole size?
The drill is rated to core up to 6 in holes in reinforced concrete. Follow the manual’s configuration limits for the chosen bit.
Is the stand included?
Yes. This exact kit is identified as including the compact core-drill stand.
Can it be used wet and dry?
Both methods are supported. Choose the bit and dust or water controls specified for the material and operating setup.
