Milwaukee
Milwaukee Tool M2 Steel Screw Extractor Set 4PC
- SKU:
- MLW49-57-9001
- Availability:
- Usually Ships Same Day
- Weight:
- 0.13 LBS
Description
DUTY®
M2 Steel Screw
Extractor Set
Double-ended extractors for stripped screws and rounded bolts, with separate drilling and extracting ends.
Product Overview
M2 steel extractors cover sizes #1–#4 for hardened screws and bolts. Use a drill driver.
Drill in reverse at high speed, then extract in reverse at low speed, following the instructions.
- Double-ended bitsDrill and extract with one bit.
- M2 steelFor hardened screws and bolts.
- Reverse operationBoth steps run in reverse.
- Two speed stepsHigh to drill; low to extract.
Technical Specifications
- Material
- M2 steel
- Bit arrangement
- Double ended
- Extractor sizes
- #1–#4
- Screw range
- No. 4–No. 24
- Drilling mode
- High speed / reverse
- Extraction mode
- Low speed / reverse
Choose the Correct Fit
Choose the extractor size for the damaged fastener and check access for straight alignment. Secure the work before beginning.
Use side A for drilling at high speed in reverse as directed. Keep the bit centered and avoid an angled entry.
Installation & Care
Switch to side B and extract at low speed in reverse. Stop if the extractor slips or binds rather than adding uncontrolled force.
Inspect both ends after use and keep the set organized by size. Only sizes #1–#3 may be used in an impact driver at low speed in reverse.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Tell Willy the fastener size, damage and available drill to check the extractor choice.
Important Product Questions
Which direction is used?
Both drilling and extraction are performed in reverse. Drilling uses high speed; extraction uses low speed.
Can I use an impact driver?
Extractor sizes #1–#3 may be used in an impact driver at low speed in reverse. Do not extend that permission to size #4.
What screws are covered?
The listed screw range is No. 4 through No. 24. Select the appropriate extractor size for the fastener.
