Milwaukee
Milwaukee Tool M18 FUEL SAWZALL Recip Saw w/ ONE-KEY - 2 Battery XC5.0 Kit
- SKU:
- MLW2822-22
- Availability:
- Usually Ships Same Day
- Weight:
- 19.26 LBS
Description
DUTY®
M18 FUEL SAWZALL
ONE-KEY Kit
A cordless reciprocating saw with ONE-KEY control and two XC5.0 batteries for an M18 cutting setup.
Product Overview
Two XC5.0 packs and an M18/M12 charger are included. Select the cutting blade for your material.
The brushless motor delivers 3,000 SPM with a 1-1/4 in stroke. ONE-KEY stores three custom profiles.
- Quick blade changesLever-action QUIK-LOK clamp.
- Adjustable shoeRepositions blade contact.
- ONE-KEY cut controlSpeed and ramp-up tuning.
- Reinforced pack railsImprove pack retention.
Technical Specifications
- Battery system
- M18
- Motor
- POWERSTATE brushless
- Stroke rate
- 3,000 SPM
- Stroke length
- 1-1/4 in
- Blade clamp
- Lever-action QUIK-LOK
- Custom profiles
- 3 saved settings
Choose the Correct Fit
Match the blade to the material and thickness. Support the work and leave room for the full blade stroke behind the cut.
Use the supplied M18 XC5.0 packs and the correct charger. Inspect the battery rails and pack before fitting.
Installation & Care
Remove the battery before blade changes or shoe adjustments. Follow the clamp instructions and verify the blade is retained.
Keep the clamp and vents clear of debris. Inspect the blade, shoe and battery connection before use; follow the operator’s manual.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help planning an M18 cutting setup? Tell Willy your material, blade needs and whether you already own compatible batteries and a charger.
Important Product Questions
Does this include batteries and a charger?
Yes. The kit includes two M18 REDLITHIUM XC5.0 packs and an M18/M12 multi-voltage charger. Choose cutting blades for the intended material.
What can I customize with ONE-KEY?
ONE-KEY provides control over cutting speed and trigger ramp-up. Up to three custom performance profiles can be saved in the tool.
Does Cut Brake stop every possible overcut?
No. Milwaukee describes automatic stopping at the end of the cut in most applications. It does not replace checking for hidden services or providing clearance.
