Milwaukee
Milwaukee Tool M18 FUEL Controlled Mid-Torque Impact Wrench w/ TORQUE-SENSE
- SKU:
- MLW3062-20
- Availability:
- Usually Ships Same Day
- Weight:
- 4.56 LBS
Description
DUTY®
M18 FUEL 1/2 in. TORQUE-SENSE Impact Wrench
M18 FUEL 1/2 in. TORQUE-SENSE Impact Wrench for task-specific cordless fastening.
Product Overview
This impact uses TORQUE-SENSE for repeatable fastening. ONE-KEY configures target settings.
LED feedback identifies cycle status. Recorded output data supports custom application reporting.
- TORQUE-SENSEControls the fastening cycle.
- ONE-KEY SetupConfigure the tool settings.
- Status FeedbackLED shows OK or NOK status.
- Output RecordsDownload data for reporting.
Technical Specifications
- Model
- 3062-20
- Battery System
- M18
- Square Drive
- 1/2 in.
- Socket Retention
- Friction ring
- Target Range
- 50–250 ft-lbs
- Drive Modes
- 4 customizable
Choose the Correct Fit
Match the accessory drive and fastener size before use. Use impact-rated accessories suited to the application.
Select the operating mode or control setup required for the joint. Follow the specified final tightening and inspection procedure.
Installation & Care
Remove the battery before changing accessories or adjusting the tool. Check that the bit or socket is fully seated and retained.
Inspect the accessory and retention mechanism before work. Follow the exact model manual for setup, maintenance and storage.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help choosing this cordless tool? Share model 3062-20, your task and the accessories you plan to use.
Important Product Questions
What does the torque range describe?
The manufacturer identifies a target torque range of 50–250 ft-lbs. This is not a maximum fastening or nut-busting torque rating.
How is the tool configured?
Use the ONE-KEY setup process and the approved application procedure. Verify suitability for the joint and OEM requirements before production fastening.
What feedback is available?
An LED reports OK/NOK installation status, and recorded tool-output data can be downloaded for custom reporting. Follow the application inspection requirements.
