Milwaukee
Milwaukee Tool M18 FUEL 7-1/4 Inch Rear Handle Circular Saw Kit
- SKU:
- MLW2930-21HD
- Availability:
- Usually Ships Same Day
- Weight:
- 20.83 LBS
Description
DUTY®
7-1/4 in Rear
Handle Saw Kit
A rear-handle cordless circular saw with a 6,000 RPM brushless motor and 2-5/8 in cut capacity.
Product Overview
A segmented brushless motor maintains cutting speed under load; shoe and guards are magnesium.
Bevel detents aid setup. A rotating dust port, LED and electric brake support controlled cutting.
- Cut capacity2-5/8 in stated depth.
- Motor speed6,000 RPM.
- Bevel setup22.5° and 45° detents.
- Electric brakeStops the blade after release.
Technical Specifications
- Blade diameter
- 7-1/4 in
- Motor speed
- 6,000 RPM
- Cut capacity
- 2-5/8 in
- Bevel detents
- 22.5° / 45°
- Shoe / guards
- Magnesium
- Blade stopping
- Electric brake
Choose the Correct Fit
Confirm the blade diameter, arbor and material application before fitting a blade. Check the workpiece support and cutting path.
Set the depth and bevel for the cut and secure both adjustments. Keep the shoe supported and allow clearance for the blade below the work.
Installation & Care
Remove the battery before blade changes or setup work. Connect dust collection only through the approved port and adapter arrangement.
Wait for the blade to stop before setting the saw down. Inspect the guard, shoe and blade regularly and keep the dust port clear.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Tell Willy the material, required cut depth and available M18 batteries to check the rear-handle saw kit.
Important Product Questions
What is the cut capacity?
The stated cutting capacity is 2-5/8 in. Check the capacity at your chosen bevel angle in the operating instructions.
What battery is the runtime claim based on?
The up-to-700-cuts rating uses an M18 REDLITHIUM FORGE HD12.0 battery. Results vary with the work.
Does it have a blade brake?
Yes. The electric brake is designed to stop the blade after the trigger is released. Still wait for complete stop before setting it down.
