Milwaukee
Milwaukee Tool M18 FUEL 1-1/4 Inch SDS Plus D-Handle Rotary Hammer w/ ONE-KEY
- SKU:
- MLW2916-20
- Availability:
- Usually Ships Same Day
- Weight:
- 12.78 LBS
Description
DUTY®
M18 FUEL 1-1/4 in. SDS Plus D-Handle Rotary Hammer with ONE-KEY
M18 FUEL 1-1/4 in. SDS Plus D-Handle Rotary Hammer with ONE-KEY for its specified jobsite application.
Product Overview
This SDS Plus hammer uses an in-line D-handle for drilling. A brushless motor supplies the impact drive.
Three modes support drilling and hammer work. AVS reduces operating vibration.
- SDS Plus ChuckRetain matching shank tools.
- D-Handle FormatSupport in-line drilling.
- Three ModesChoose rotary or hammer use.
- AVS SystemReduce operating vibration.
Technical Specifications
- Model
- 2916-20
- Battery System
- M18
- Bit Interface
- SDS Plus
- Impact Energy
- 3.65 ft-lbs
- Speed
- 0–810 RPM
- Blow Rate
- 4,650 BPM
Choose the Correct Fit
Choose an SDS Plus accessory and operating mode for the material. Check drilling depth and the location of concealed services.
Use the prescribed grip and suitable dust controls. Support the work and do not force the accessory during drilling or chiseling.
Installation & Care
Remove the battery before changing accessories or adjusting the setup. Check that the shank is clean and fully retained.
Inspect the accessory and dust equipment before work. Follow the manual for chuck care, ventilation and periodic maintenance.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help choosing this cordless tool? Share model 2916-20, your task and the accessories you plan to use.
Important Product Questions
What are the operating modes?
The manufacturer lists rotary hammer, hammer only and rotary only. Select the appropriate accessory and mode for the material.
Which dust accessory is identified?
The manufacturer identifies the 2916-DE HAMMERVAC 1-1/4 in. dedicated dust extractor. Verify the full setup and exposure-control requirements before use.
What handling features are provided?
The D-handle supports in-line positioning and AVS reduces vibration. AUTOSTOP responds to over-rotation during a bind-up, and ONE-KEY supports tool tracking and inventory management.
