Milwaukee
Milwaukee Tool M18 5/8" Viega PureFlow Jaw for M18 Short Throw Press Tool
- SKU:
- MLW49-16-2632P
- Availability:
- Usually Ships Same Day
- Weight:
- 2.79 LBS
Description
DUTY®
5/8" Viega PureFlow
Press Jaw
A size-coded jaw for Viega PureFlow connections with the M18 Short Throw Press Tool.
Product Overview
This 5/8" Viega PureFlow jaw fits the M18 Short Throw Press Tool. It serves matching PureFlow connections, not PEX crimp rings.
The easy-opening, in-line design supports one-handed positioning. Color coding matches the fitting size to simplify jaw selection.
- PureFlow fitFor the matching 5/8" Viega connection.
- Size color codeMatches the PureFlow fitting size.
- Easy openingSupports one-handed jaw positioning.
- In-line layoutHelps place the tool near installed tubing.
Technical Specifications
- Nominal size
- 5/8 in
- Fitting system
- Viega PureFlow
- Press tool
- 2674-20
- Jaw layout
- In-line
- Jaw opening
- Easy-open
- Identification
- Size color code
Choose the Correct Fit
Use this 5/8" jaw with the matching Viega PureFlow fitting. Confirm the sleeve, tubing and fitting details in Viega’s installation instructions.
The compatible tool is the M18 Short Throw 2674 family. Do not choose a FORCE LOGIC jaw or a PEX crimp jaw solely because its size matches.
Installation & Care
Remove the battery before replacing the jaw, then lock the retaining pin. Check for damage and keep the working surfaces clear of debris.
Seat the fitting and position the jaw as Viega directs. Allow the full press cycle to finish, then inspect the connection before testing.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help matching a press or expansion accessory? Share model 49-16-2632P, your tool model, fitting system and connection size.
Important Product Questions
Which Milwaukee press tool does this fit?
It fits the M18 Short Throw Press Tool, including the 2674-20C and 2674-20P configurations. It is not a general-purpose FORCE LOGIC jaw.
Can this replace a PEX crimp jaw of the same size?
No. This jaw is for Viega PureFlow press connections. PEX crimp rings need the appropriate crimp jaw and the correct fitting-system procedure.
What does the color coding identify?
The jaw is color coded by size to match Viega PureFlow fittings. Confirm the stamped size and model as well; color alone does not verify the whole connection.
