Milwaukee
Milwaukee Tool M18 3/8" PEX Crimp Jaw for M18 Short Throw Press Tool
- SKU:
- MLW49-16-2630C
- Availability:
- Usually Ships Same Day
- Weight:
- 2.93 LBS
Description
DUTY®
3/8" PEX Crimp
Press Jaw
A spring-loaded PEX crimp jaw made for the M18 Short Throw press tool family.
Product Overview
This 3/8" PEX crimp jaw fits M18 Short Throw tools for ring-type PEX connections. Its spring-loaded opening helps alignment.
The in-line jaw layout helps position the tool near installed tubing. Match the jaw, crimp ring and fitting before starting the cycle.
- PEX crimp fitFor matched 3/8" PEX crimp connections.
- Spring-loadedGrips the ring to help hold alignment.
- Easy openingSupports controlled jaw placement.
- In-line layoutKeeps the jaw aligned with the press tool.
Technical Specifications
- Nominal size
- 3/8 in
- Connection
- PEX crimp
- Fitting types
- F1807 & F2159
- Tool models
- 2674-20
- Jaw opening
- Spring-loaded
- Jaw layout
- In-line
Choose the Correct Fit
Match this 3/8" jaw to the crimp ring and PEX fitting. Milwaukee lists F1807 & F2159 compatibility; follow the fitting maker’s sizing instructions.
Use the M18 Short Throw press tool family. Do not substitute a PureFlow press sleeve or ProPEX expansion connection for a crimp-ring assembly.
Installation & Care
Remove the battery before changing jaws and secure the retaining pin. Check the jaw for cracks, damage or debris before making a connection.
Position the crimp ring as the fitting maker directs. Keep the jaw square, complete the tool cycle and check the finished crimp as instructed.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help matching a press or expansion accessory? Share model 49-16-2630C, your tool model, fitting system and connection size.
Important Product Questions
Which press tool is required?
Use this jaw with the M18 Short Throw tool family. Verified models are 2674-20. Short-throw and FORCE LOGIC jaws are distinct accessory families.
Is this an expansion head or a PureFlow jaw?
No. It is a 3/8" PEX crimp jaw for F1807 & F2159 connections. Expansion fittings and PureFlow sleeves need the matching system-specific accessories.
How does the spring-loaded opening help?
It grips the crimp ring to help maintain alignment. It does not replace correct ring position, a complete press cycle or the fitting maker’s inspection procedure.
