Milwaukee
Milwaukee Tool M12 FUEL 1/2" Right Angle Impact Wrench w/ Friction Ring (Bare Tool)
- SKU:
- MLW2565-20
- Availability:
- Usually Ships Same Day
- Weight:
- 3.55 LBS
Description
DUTY®
M12 FUEL 1/2 in. Right Angle Impact Wrench
M12 FUEL 1/2 in. Right Angle Impact Wrench for controlled, task-specific operation.
Product Overview
This right angle impact reaches confined fasteners. Four modes provide task-specific control.
Auto shutoff manages hand-tightening force. Bolt removal mode slows after the fastener breaks free.
- Four ModesTailor the drive to the task.
- Auto ShutoffHelps control hand-tightening.
- Bolt Removal ModeSlows after the fastener frees.
- Work LightingIlluminate the socket area.
Technical Specifications
- Model
- 2565-20
- Battery System
- M12
- Square Drive
- 1/2 in.
- Socket Retention
- Friction ring
- Speed
- 0–3,000 RPM
- Impact Rate
- 0–3,600 IPM
Choose the Correct Fit
Match the accessory drive, retention style and fastener size before use. Use impact-rated accessories for impact operation.
Select a suitable operating mode for the joint. Follow the application requirements for final tightening and verification.
Installation & Care
Remove the battery before fitting accessories or making adjustments. Confirm the accessory is fully seated and retained.
Inspect the accessory and tool before use. Follow the operator manual for handling, maintenance and storage.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help choosing this cordless tool? Share model 2565-20, your task and the accessories you plan to use.
Important Product Questions
Which sockets fit this model?
Use impact-rated sockets with a 1/2 in. square drive. This model uses friction ring retention; check the socket retention arrangement before use.
How is the drive controlled?
Four-mode DRIVE CONTROL lets you select operation suited to the fastener and application.
Does impact tightening establish final torque?
Use the required verification method for the joint and application. Do not substitute impact operation for a specified final-torque check.
