Milwaukee
Milwaukee Tool HOLE DOZER with Carbide Teeth Small Arbor W/ Cobalt Pilot Bit
- SKU:
- MLW49-56-7110
- Availability:
- Usually Ships Same Day
- Weight:
- 0.24 LBS
Description
DUTY®
Small Arbor
With Cobalt Pilot
Fit hole saws up to 1-3/16 in with this arbor and cobalt pilot.
Product Overview
The small arbor carries a 1/4 in × 3-1/2 in cobalt pilot for smaller hole-saw sizes.
The Quad Edge tip limits heat buildup, while a 135° split point helps the pilot start without wandering.
- Cobalt pilotFor demanding materials.
- 135° split pointHelps start on the mark.
- Quad Edge tipHelps limit drilling heat.
- Metal / wood drillingAlso abrasive materials.
Technical Specifications
- Saw size
- Up to 1-3/16 in
- Pilot diameter
- 1/4 in
- Pilot length
- 3-1/2 in
- Pilot material
- Cobalt
- Point angle
- 135° split point
- Tip geometry
- Quad Edge
Choose the Correct Fit
Match the arbor, pilot and saw before assembly. Verify the saw-diameter range and drill connection rather than assuming universal fit.
Select the hole saw and pilot for the actual material. This cobalt pilot is specified for stainless steel, cast iron, wood and abrasive materials.
Installation & Care
Follow the arbor instructions for pilot projection and retention. Secure the work and brace the drill before starting.
Disconnect power before adjustments. Check the pilot tip and retaining hardware for wear or damage, and let hot parts cool.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help matching an arbor or pilot? Send Willy your hole-saw diameter, arbor model and drill connection.
Important Product Questions
Does the pilot’s fit make every saw compatible?
No. The arbor is for up to 1-3/16 in hole saws. Check the saw connection and drill shank as well.
Can this pilot drill stainless steel?
Yes. Stainless steel, cast iron, wood, metal and abrasive materials are listed applications. Match drill speed and lubrication to the material.
How far should the pilot project beyond the saw?
Set projection and tighten the retaining screw as directed by the arbor instructions. Do not guess from the pilot’s overall length.
